User manual ZOOM ZFX

[. . . ] If a software installation warning dialog box is shown, click [Continue]. If a Windows Security message indicating that the driver software publisher cannot be verified appears, click [Install this driver]. 1t Audio Driver (Not Responding)" may appear, but this is not a problem. Start-up Guide Read This First Thank you for selecting the ZFX Stack package/ZFX Control package. [. . . ] INPUT SELECT [Hi-Z/MIC/LINE] switch CH2 [GAIN] knob The MIC INPUT CH2/R jack input can be gained with CH2 [GAIN] knob. As well, "MIC" is for MIC INPUT jacks, and "LINE" is for line input jacks. G Residual Noise Level •MIC Input [MONO/STEREO] switch This switches the direct monitor sound between monaural and stereo. [DIRECT MONITOR] knob The input sounds to Hi-Z, MIC INPUT and other jacks can be sent to OUTPUT L(MONO)/R and PHONES jacks to get PHANTOM [ON/OFF] switch •LINE INPUT To supply the phantom power to a condenser microphone, turn on the PHANTOM [ON/OFF] switch. Jp © ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited. zFX-Hardware-E-1 HARDWARE MANUAL Controls and indicators of S2t CH1[TUBE] knob PHANTOM[ON/OFF] switch CH1[SOLIDSTATE] knob CH2[PEAK] indicator [OUTPUT] knob * Available only for CH2[GAIN] knob [PHONES] knob Hi-Z jack. [DIRECT MONITOR] knob CH1[PEAK] indicator [MONO/STEREO] switch Connections and Functions 9 Rhythm machine 6 Monitor System (Audio component/ Amplified speaker) 1 Guitar/Bass Connect your guitar/bass to the Hi-Z jack with a monaural shielded cable. To enable the Hi-Z input, turn the INPUT SELECT [Hi-Z/MIC/LINE] switch at the front panel to "Hi-Z" CH/R jack. XLR plugs, stereo phone plugs (balanced), and monaural phone plugs (unbalanced) can be connected. to enable , turn the INPUT SELECT [Hi-Z/MIC/LINE]switch to "MIC". Phantom power might be supplied to the condenser microphones with turning on the PHANTOM [ON/OFF] switch. 7 Dynamic microphone and condenser microphone 2 Headphone 2 Headphone Headphones should be connected to the PHONES jack, and its volume can be adjusted with [PHONES]knob. 2kg [PHONES] knob CH1 [SOLIDSTATE] knob Headphone volume can be adjusted with [PHONES] knob. The input signals from Hi-Z and MIC INPUT CH1/L jacks can be gained with CH1 [SOLIDSTATE] knob. With these knobs, you can mix the tube gained sound and the transistor gained sound for the guitar/bass inputs. [OUTPUT] knob Output volume of the output jacks can be adjusted with [OUTPUT] knob. INPUT SELECT [Hi-Z/MIC/LINE] switch CH2 [GAIN] knob The MIC INPUT CH2/R jack input can be gained with CH2 [GAIN] knob. As well, "MIC" is for MIC INPUT jacks, and "LINE" is for line input jacks. G Residual Noise Level •MIC Input [MONO/STEREO] switch This switches the direct monitor sound between monaural and stereo. [DIRECT MONITOR] knob The input sounds to Hi-Z, MIC INPUT and other jacks can be sent to OUTPUT L(MONO)/R and PHONES jacks to get PHANTOM [ON/OFF] switch •LINE INPUT To supply the phantom power to a condenser microphone, turn on the PHANTOM [ON/OFF] switch. Jp © ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited. ZFX-Hardware-E-1 USB/Cubase LE 4 Startup Guide This USB/Cubase LE 4 Startup Guide explains how to install Cubase LE 4 on a computer, make connections and settings for this unit, and perform recording. [. . . ] Mixer window If the transport panel is not shown, access the "Transport" menu and select "Transport Panel". When there is a high number of plug-ins, the computer's processing power may not be able to keep up. Reducing the number of tracks for simultaneous playback can also be helpful. If applications still run very slowly or the computer itself does not function properly, disconnect this unit from the computer and shut down Cubase LE 4. [. . . ]