User manual ZOOM RC4
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZOOM RC4. We hope that this ZOOM RC4 user guide will be useful to you.
You may also download the following manuals related to this product:
ZOOM RC4 AUDIO INTERFACE MANUAL (1194 ko)
Manual abstract: user guide ZOOM RC4
Detailed instructions for use are in the User's Guide.
[. . . ] Warning: formatting a card will permanently erase all data on it.
Formatting an SD card
1. Press 2. Use
press .
to open the Main Menu. to select SETTING and .
3. Use 4. Use 1
to select SD Format and press
to select "Yes" to format or "No" . to cancel, and press
5. When the reconfirmation screen appears,
use the same procedure to select again and press .
·Select"Yes"tostartformatting. [. . . ] · Formatting also initializes the built-in memory at the same time.
6
Turning operation sounds on or off
The output of beeping sounds from the RC4 speaker at startup and during operation can be turned on or off.
Turning operation sounds on or off Reducing noise
1. Press 2. Use
press .
to open the Main Menu. and .
3. Use 4. Use
press
1, 5
5. Press
2, 3, 4
Reducing noise
Turn the low-cut filter function on to reduce wind sounds and other noise.
1. Press 2. Use
press .
to open the Main Menu. to select LO CUT and
3. Use
press .
to select ON (MIC Only) or OFF, and again after the setting is made.
1, 4
4. Press
NOTE
2, 3
Use the windscreen included in the APQ-3HD accessory package to further reduce noise.
7
Adjusting the recording level
By changing the recording sensitivity, you can record both quiet sounds and loud band performances at the optimal level. 1. Set the MIC GAIN switch according to the recording conditions.
L Low sensitivity Band performances and concerts H High sensitivity Field recordings AUTO Automatic sensitivity adjustment Use in various situations to maintain an even recording level without breaks in sound
When set to AUTO, use the AUTO LEVEL menu to set how the mic sensitivity works.
Sensitivity increases and decreases according to the input level Sensitivity decreases in response to the highest input level
Adjusting the recording level Turning sound monitoring on or off
1
NOTE
AUTO LEVEL
Up and Down
One Way Down
Turning sound monitoring on or off
Turn this on to hear the sound being recorded through devices connected to the line/headphones output, TV and HDMI jacks.
1. Press 2. Use
press .
to open the Main Menu. and
3. Use
press
1, 5
4. Use
press
5. Press 2, 3, 4
8
Setting video-recording lighting
You can set the camera sensitivity to suit the video recording conditions. This allows the unit to record video optimally even in dark places or on stages with bright lights. 1. Press
Setting video-recording lighting Setting the image quality
2. Use
and press .
to select SCENE to select the mode and .
3. Use
press
1, 4
· "AUTO"adjuststolightingconditions automatically. · "CONCERTLIGHTING"isbestforconcerts andothersituationswithbrightlights. · "NIGHT"isbestfornightanddarksituations.
2, 3
4. Press
again after the setting is made.
Setting the image quality
You can set the resolution and frame rate used during recording. .
6. When you are done editing, press
15
Editing recordings
DIVIDE
Change the point where the file will be divided Play/pause Confirm the point where the file will be divided
TRIM(partialdeletion)
Move trim points to set how much of the file to delete at its beginning and end Switch between the beginning and end trim points Play/pause Confirm the trim points
INFORMATION(aboutthefile)
Return to the thumbnail list
16
Connecting external devices
Connecting external devices
This unit can be connected to various external devices as needed.
Connect to a computer (via USB) to edit and save files and upload them to video sharing sites
With this unit's power off, connect its built-in USB connector to a computer running Windows or Macintosh. When connected, you can use the bundled HandyShare software for the following functions. · Upload to video sharing sites · Add reverb and other effects to audio · Playback audio or video · Delete or backup files · Extract parts of selected audio or video
NOTE
HandyShare is on the included SD card. See page 1.
Input sound from another device (LINE IN connection)
This unit can record sounds from external devices. When an external device is connected to the LINE IN jack, the stereo mic is disabled.
17
Connecting external devices
Listen with headphones or audio equipment (LINE OUT connection)
Use this connector when you want to listen with headphones or connect to the amplifier of an external audio device. Turn monitoring on to listen to sound input during recording through headphones. See "Turning sound monitoring on or off" on page 8.
View on a TV (AV connection)
Use an AV cable to output recorded video and audio to a TV or similar device. · Before connecting to a TV, use the SETTING menu to set the TV Out item according to the region where you are using the device.
View on a TV (HDMI connection)
Use an HDMI cable to connect the unit to an HDMI-compatible TV to view recordings with high definition image quality. NOTE Since different TVs support different audio formats, correct playback might not be possible in some cases.
Caution
The RC4 HDMI connector is a Type C Mini connector.
When using an HDMI cable (purchased separately), be sure to use a High Speed HDMI (category 2) cable with a Type C Mini connector on one end and a connector that matches your TV's HDMI input on the other.
18
Viewing information
You can check the firmware version and remaining recordable memory.
Viewing information Resetting the unit
1. Press 2. Use
press .
to open the Main Menu. [. . . ] 4. When you are done checking, press 1, 4
.
2
Resetting the unit
The unit can be reset to the settings, including SCENE and video and audio quality, it had when it was shipped from the factory.
1. Press 2. Use
press .
to open the Main Menu. 3. Use 4. When the confirmation screen opens, select "Yes" to execute the change or "No"
1
to cancel, and then press
.
2, 3, 4
19
Upgrading the firmware version
Upgrading the firmware version
Upgrade the firmware version when necessary.
NOTE
You can check the firmware version using the INFORMATION menu item.
· The latest version of the firmware can be downloaded from www. zoom. co. jp.
1. Copy the file for upgrading the firmware to the SD card. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ZOOM RC4
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZOOM RC4 will begin.