User manual ZOOM MRS802V2

[. . . ] This is useful to record several projects in one go on an external recorder or to create automatic accompaniment for a number of songs. Because the playlist information can be used when creating an album for burning a CD, you can check the song sequence before deciding on the final content of the album. • Support for disc-at-once CD creation In addition to the track-at-once method which inserts blank gaps between tracks on an audio CD, the MRS-802 Version 2. 0 also supports the disc-at-once method which writes tracks continuously without gaps. Using disc-at-once, it is easy to create a non-stop CD with seamless content. You can also divide one project into several tracks and write the result to an audio CD. [. . . ] (Subsequent projects are renumbered. ) ● To delete all projects from a playlist On the playlist registration screen, press the [DELETE/ERASE] key in the control section and then the cursor down key. To delete all projects from the playlist, press the [ENTER] key. ● To switch the V-take for the master track Press the [EXIT] key repeatedly to return to the main screen. Load the project for which you want to switch the V-take, and select the V-take for the master track. Then return to the playlist registration screen. ZOOM MRS-802 Ver 2. 0 5 MRS802v2(E). fm 6 ページ ２００４年５月２７日　木曜日　午後５時５９分 Continuous project playback (sequence play function) ● PLAY[R] key Playlist playback Select the playlist for continuous project playback as follows. Starts playback from the beginning of the current project. ● STOP[P] key 1. From the main screen, press the [PROJECT] key in the display section. Use the cursor left/right keys to bring up the indication “PROJECT SEQ PLAY” on the display, and press the [ENTER] key. When a CD written with track-at-once is played on a CD player, a mute section of two seconds follows each track. This method is suitable for creating a regular music CD where each track is separated by blanks. ● Disc-at-once (DAO) 1. Insert a CD-R/RW disc into the integrated CD-R/RW drive. Use a blank CD-R/RW disc or a CD-RW disc that has been completely erased. 2. Verify that the V-takes you want to use for the audio CD are selected for the master tracks of the projects. The master tracks of projects registered in the album are written to the CD in a single operation without gaps. When a CD written with disc-at-once is played on a CD player, the disc plays through without interruption, because the multiple tracks are joined seamlessly. If necessary, you can use marks as PQ subcode information (indicating track start/end points and other information) to divide a single project into multiple tracks for creating the audio CD. This is convenient to make a CD of a continuous live performance where the listener can still jump to specific songs. 3. From the main screen, press the [CD-R/ RW] key in the display section. The CD-R/RW menu appears. 4. Verify that “CD-R/RW AUDIO CD” is shown on the display and press the [ENTER] key. The display indication changes as follows. AUDIO CD BURN CD 5. Use the cursor left/right keys to bring up the indication “AUDIO CD ALBUM” on the display, and press the [ENTER] key. In this condition, you can select the write method. HINT If you burn the CD with disc-at-once, but still want to have blanks between specific songs, you should add a blank portion to the master track of each respective project. ALBUM TYPE:DAO ZOOM MRS-802 Ver 2. 0 7 MRS802v2(E). fm 8 ページ ２００４年５月２７日　木曜日　午後５時５９分 Creating a CD using the disc-at-once method Turn the dial to select “DAO (disc-at-once)” or “TAO (track-at-once)”, and press the [ENTER] key. The screen for registering projects for the album appears. 6. END OF PROJECT 9. 2 END OF PROJECT 0 0 0 1 Turn the dial to select the project to be used as track 2 of the album. 10. The maximum allowable number of tracks is 99, provided that there is enough free capacity on the disc. The indication “END OF PROJECT” denotes the end of the album list of projects. When the album display is first called up, no project has been registered, therefore the indication “END OF PROJECT” appears. Turn the dial to select the project to be used as track 1 of the album. The indication “END OF PROJECT” moves up to the next track (track 2 in this example), and the screen changes as follows. Project number and project name Number and name of project to write as a track HINT When you press the cursor down key, the second line of the display shows “REMAIN”, and the remaining write time on the inserted CD-R/RW disc appears on the counter. Press the cursor up key to return to the previous indication. 7. ● To change projects in an album Use the cursor left/right keys to select the track number for which you want to change the project, and use the dial to select another project. ● To insert projects in an album PRJ 001 PRJ001 436120 1 Track number Number of track to write on CD-R/RW disc V-take duration Length of the V-take selected for the master track of the project, in hours (H), minutes (M), seconds (S), and milliseconds (MS) Use the cursor left/right keys to select the track number where you want to insert a project. In this condition, use the dial to select another project, and press the [ENTER] key. (Subsequent tracks are renumbered. ) ● To delete a project from an album Pressing the PLAY [R] key in this condition will play the master track of the currently displayed project. NOTE • A project for whose master track an unrecorded V-take is selected cannot be chosen as source material. [. . . ] In this condition, you can select the playlist (1 - 10) to include in the album. NOTE • If the tracks have not been separated as expected, press the [EXIT] key repeatedly to return to the main screen, and check whether marker information has been created properly for the project. • If marks are too close together, the indication “Track Is Short” appears on the display, and marker-based separation cannot be enabled for that project. If you attempt to enable marker-based separation for a project and this causes the number of tracks to exceed 99, the indication “Too Many Track” appears, and marker-based separation cannot be enabled. IMPORT PlayList 3. 1 Playlist number Turn the dial to select the playlist, and press the [ENTER] key. The indication “IMPORT SURE?” appears on the display. IMPORT SURE? 4. To import the playlist information, press the [ENTER] key. [. . . ]