User manual ZOOM MACKIE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZOOM MACKIE. We hope that this ZOOM MACKIE user guide will be useful to you.

ZOOM MACKIE : Download the complete user guide (42 Ko)

You may also download the following manuals related to this product:

ZOOM MACKIE (78 ko)

Manual abstract: user guide ZOOM MACKIE

Detailed instructions for use are in the User's Guide.

 [. . . ] 1. 10 Manual Supplement
This supplement to the operation manual covers the Mackie Control mode which has been added to the control surface mode from version 1. 10. 

About the Mackie Control mode
In Mackie Control mode,  MIDI messages output by the HD8/ HD16 and MIDI messages recognized by the HD8/HD16 are largely equivalent to Mackie Control.  [. . . ] (2) Select the name of the port to which the HD8/HD16 is connected as the MIDI I/O port to be used for "Mackie Control". 
* For information on MIDI ports to select for various DAW software applications,  see the ZOOM Corporation web site (http://www. zoom. co. jp). For details on making DAW software settings,  refer to the documentation for the respective application. 

CTRLR SETUP 1/2 >MODE SELECT
(2) Use the cursor left/right keys to bring up the indication "FILE SELECT" on the display,  and press the [ENTER] key. 
The key mapping ﬁle selection screen appears. 

Using Mackie Control mode
The procedure for using the control surface functions of the HD8/HD16 in Mackie Control mode is as follows. 

CTRLR SETUP 1/2 >MODE SELECT
(3) Verify that the indication "MODE SELECT" is shown on the display,  and press the [ENTER] key. 
The control surface mode selection screen appears. 

1. 

Import a key mapping ﬁle to the hard disk. 
To use Mackie Control mode,  a setup ﬁle (key mapping ﬁle) that maps the HD8/HD16 control keys to DAW software functions is to be copied to the hard disk of the HD8/HD16. Key mapping ﬁles for various DAW software applications will be made available for download at the ZOOM Corporation web site. For details,  please visit the web site: http://www. zoom. co. jp (The default key mapping setup is for the Steinberg Cubase program. )

File Select CUBASE. BDF
Key mapping file

5. 

Terminating control surface mode
(1) Hold down the [SHIFT] key and press pad 2 (CONTROL SURFACE). 
A conﬁrmation message about terminating the control surface mode appears. 

Mode Select Mackie Control
(4) Turn the dial to select "Mackie Control" and press the [ENTER] key. 
The HD8/HD16 control surface mode is now set to Mackie Control mode. 
Icon indicating Mackie Control mode

(3) Turn the dial to select the key mapping ﬁle and press the [ENTER] key. 
The key mapping ﬁle is loaded. * When Mackie Control mode and USB mass storage mode are being used simultaneously,  a key mapping ﬁle cannot be loaded. If you want to use Mackie Control mode and USB mass storage mode simultaneously,  load the key mapping ﬁle ﬁrst and then activate the USB mass storage mode.  [. . . ] (For details on how to use the Generic Remote mode,  see the "Cubase LE Installation Guide/Control Surface Operation Guide". )

HD8/HD16 Ver.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZOOM MACKIE

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZOOM MACKIE will begin.