User manual ZOOM H1V2

[. . . ] To turn the unit OFF, slide the power switch down for about 1 second again. ↓ Prepare Disabling the buttons The buttons can be disabled to prevent recording from being stopped accidentally, for example. 1. To enable use of the buttons again, slide the power switch back to the middle position. ↑ 1 Prepare Prepare Setting the date and time 1. , turn the Power / Disabling buttons / Setting the date and time / Reducing noise Set the date and time on the unit. 2. Use and to set the value, and press to move to the next item. 2 2, 3 2 1, 2 • Press to return to the previous item. [. . . ] and during Prepare MEMO Adding track marks / Formatting microSD cards Prepare Formatting microSD cards If a microSD card that is not properly formatted is inserted into this 1. After formatting completes or is cancelled, the home screen reappears. MEMO You can also open this screen by pressing while turning the power ON. 6 Connect Connecting with a computer <Supplement> New function in Ver. 2 1. 2. With the power off, connect this unit to a Windows PC or a Macintosh using a USB cable. <To use as a MicroSD card reader> Press while “CArd” is displayed. <To use as an audio interface> Press while “AUdIo” is displayed. MEMO If no action is performed for 10 seconds, it will automatically start working as a MicroSD card reader. Displayed alternately at one-second interval 3. <When “CArd” is selected> It starts working as a MicroSD card reader. <When “AUdIo” is selected> When the screen to select the sampling frequency appears, use / to select the frequency and press . MEMO The sampling frequency should be set to the same value as the recording software and playback files. Blink / Blink 4. It starts working as an audio interface. This unit’s input signal is sent to the computer, and you can use this unit to monitor the playback signal on the computer. 1 1 Adjusts the output level 2 Switches on/off the LO CUT function 3 Switches on/off the AUTO level function 4 Adjusts the input level 5 Disables the keys 6 The playback signal of the computer can be monitored when line/headphone output jack is not used. Input/output level 2 3 4 5 6 Part names and functions • Parts of the unit 9 4 1 2 5 6 7 3 8 10 11 14 15 16 17 18 19 20 21 12 13 • Screen indications • Inserting the battery 2 3 1 4 5 Open the case while pressing here and then insert the battery. Note: Use alkaline or NiMH batteries. 7 • Parts of the unit 1 2 3 4 5 6 7 8 9 Line/headphones output jack Volume adjustment buttons microSD card slot LO CUT switch AUTO LEVEL switch REC FORMAT switch Tripod mount Battery compartment cover Stereo microphone Outputs sound to headphones or external equipment. This lights during recording and blinks rapidly if the input signal is too loud (peak detection). Use to start and stop recording, and to confirm file deletion, for example. Use to listen to recordings when not using the line/headphones output jack. Connect to a computer to power the unit by USB or to trans- 10 Recording/peak indicator 11 Liquid crystal display (LCD) 12 Record button 13 Built-in speaker (mono) 14 Mic/line input jack 15 Input level buttons 16 Fast forward button 17 Play button 18 Fast reverse button 19 Delete button 20 Power button 21 USB jack • Screen indications 1 2 3 4 Level meters File/format information Battery level indicator Time display These show input and output levels. This area shows the recording format and the recording date and file number of the playing file. This shows the remaining recordable time of the inserted microSD card, the playback time or the name of a file that is about to be erased, for example. These show the current operating state. 5 Status indicators 8 FCC regulation warning (for the U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Files recorded to the microSD card are saved in the “FOLDER01” subfolder inside the “STEREO” folder on the card. “BLT-IN” subfolder inside the “STEREO” folder. 11 Safety and Operation Precautions This indicates that if a user ignores this warning and handles the device incorrectly, serious injury or death could result. Warning Caution This indicates that if a user ignores this caution and handles the device incorrectly, bodily injury or damage to equipment could occur. Observe the following precautions to use this unit safely. • Power and batteries • Use only the ZOOM AD-17 (DC5V 1A) USB-connection type AC adapter (sold separately). • Unplug the AC adapter when the unit will not be used for a long time. • When using a battery, insert one commercially-available alkaline or NiMH AA battery with the correct orientation. • Remove the battery from the unit if it will not be used for a long time. • Operation environment Avoid using the unit in the following types of places, because doing so could cause malfunction. [. . . ]