User manual ZOOM G3X

[. . . ] The ZFX Stack package/ZFX Control package includes the ZFX Plug-in which gives access to a wide range of amplifier sounds and effects, with amazingly versatile settings. The ZFX Plug-in can of course be used on its own, but it also works great in combination with the bundled DAW application or other DAW applications that you may own. This Startup Guide explains the necessary steps for installing the ZFX Plugin on your computer and provides basic information about how to produce sound. * If you do not want a shortcut to be created on the Desktop, remove the check mark from the box. [. . . ] 9 Rhythm machine USB jack 5 Computer 5 Computer The S2t/C5. Rhythm machines and CD/MD players can be connected to the AUX IN jack with stereo cables (usually Y-cables). The signal will not be sent to the computer, but directly to OUTPUT L/MONO and OUTPUT R jacks, with no effects. 6 Monitor System 8 MTR 0 Keyboard The monitor system such as audio components and amplified speakers can be connected to OUTPUT jack. 0 Keyboard AUX IN jack OUT PUT R jack OUT PUT L/MONO jack MIC INPUT CH1/L jack MIC INPUT CH2/R jack 7 Dynamic microphone and condenser microphone 9 Rhythm machine When connecting microphones, use MIC INPUT CH1/L jack or MIC INPUT The instruments with stereo outputs, typically keyboards, should be connected to the line inputs. The L side to LINE INPUT CH1/L jack, and the R side to LINE INPUT CH2/R jack. These inputs will be available when the INPUT SELECT [HiZ/MIC/LINE]switch is turned to "LINE". CH1 [TUBE] knob The Hi-Z jack input can be gained through a tube with CH1 [TUBE] knob. 1t : hardware specifications G Number of Audio Record/ Playback Channels G Audio Sampling G Frequency Response G USB G Inputs •Hi-z Input Record: 1 pair of stereo Playback: 1 pair of stereo 24bit 48kHz/44. Jp © ZOOM Corporation Reproduction of this manual, in whole or in part, by any means, is prohibited. zFX-Hardware-E-1 HARDWARE MANUAL Controls and indicators of S2t CH1[TUBE] knob PHANTOM[ON/OFF] switch CH1[SOLIDSTATE] knob CH2[PEAK] indicator [OUTPUT] knob * Available only for CH2[GAIN] knob [PHONES] knob Hi-Z jack. From the "Devices" menu of Cubase LE 4, select "VST Connections" and select the device containing the string "ZOOM S2t C5. New audio track Insert the supplied "Cubase LE 4" DVD-ROM into the DVD drive of the computer, and perform the installation steps. When you insert the DVD-ROM, a screen asking what you want to do appears. When the contents of the DVD-ROM are shown, open the "Cubase LE 4 for Windows" folder by double-clicking on it, and then doubleclick the executable "Setup" ("Setup. 1t Audio" is listed under the Play and Record devices and that the device is checked. (To switch between Play and Record, click the tabs at the top of the window. ) If the device is not checked, right-click on the icon for the device and click "Set as Default Device" so that a check mark appears. Use the tabs at top left to switch between input and output, and verify that "ZOOM S2t C5. If another device is selected, click the device port field and change the selection. If the Inspector is not shown, click here to toggle the Inspector show/hide setting. To start Cubase LE 4, double-click the Cubase LE 4 shortcut icon that was created on the desktop. [. . . ] (2) In the "Plug-in Information" window, click the "VST 2x Plug-in Paths" button. For optimum enjoyment While using Cubase LE 4, other applications may slow down drastically or a message such as "Cannot synchronize with USB audio interface" may appear. If this happens frequently, consider taking the following steps to optimize the operation conditions for Cubase LE 4. This window shows the channel assigned to the created track, and the master channel. [. . . ]