User manual ZONET ZVC7611

[. . . ] Copyright Statement is the registered trademark of Zonet Technology Inc. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Zonet Technology Inc. Without the permission of Zonet Technology Inc. , any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. Table of Contents 1. [. . . ] Using the Administrator Utility IPCam Admin Utility allows users to search and setup ZVC7611/ZVC7611W located within Intranet or Internet. From the utility, users can view all the information of the selected camera; furthermore, it provides a setting wizard, which can guide users to add ZVC7611/ZVC7611W to the network easily and promptly. Click Start select Programs\IP Camera\Admin Utility to run the utility. to run the utility. 11 6. 1 General Setting Information of Camera Camera Information Task Bar Search Camera Click Search Camera to search cameras on the network. It displays MAC address, IP Address, Camera Name and Model of the selected camera. Browse Camera via Web Click Browse Camera via Web to activate browser and auto connect to IP cam to get video Configure Camera Click Configure camera to change the IP setting and user name password of the IP Cam you selected. Languages Language Supports 3 languages (English/Japanese/Chinese). 12 When you click Configure Camera icon User Name: Admin Password: 1234 , a screen will pop up to enter User Name and Password. The default value is as follows. 13 6. 1. 1 LAN Setting IP Address: Enter an IP Address within the IP address range on your LAN. Default IP Address: http://192. 168. 2. 3 NetMask: Subnet Mask field must match the subnet setting on your LAN. Gateway: Gateway setting must be the same with the gateway used by the PCs on your LAN. DNS: DNS Server (Domain Name Server) translates names to IP addresses. Please click System configure button Configure Cameras from popup menu Note: If you're prompted by a windows security alert which asks you if you want to block IPCamViewer program, please click Unblock button, or IPCam Surveillance Software will not be able to function correctly. and select . 18 7. 1. 1. 1 Camera In Camera tab you can configure all ZVC7611/ZVC7611W you wish to connect. Up to 16 cameras can be connected simultaneously. Channel: Select the channel number you wish to set. Camera Search: List all cameras found on your local network Select: Choose a camera, and click Select button to add it into the channel you want to view Refresh: Rescan all cameras on your local network. Camera Configuration: *Name: Default value is IP Camera/Wireless IP Camera, you can change the name of ZVC7611/ZVC7611W so you can remember the location of purpose easily. Password changed if you changed the password of selected camera. *: It's recommended to use Select button to fill the content of this field. Reset: Clear all fields in Camera Configuration section. OK: Save settings in this tab. 19 After clicking OK button to save settings, you'll see the image in IPCam Surveillance Software's main menu: 20 7. 1. 1. 2 Schedule Recording In Schedule Recording tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pre-defined schedule. Channel: Select the channel number you wish to set. New: One Time Schedules: Specify the time duration of this one-time schedule, then click OK to save settings 21 Weekly Schedules: Check selected weekdays, and set the start time in From. You can set the duration of video recording in Period (HH:MM:SS), and end time will be displayed in To automatically. Click All Time Record button to define a recording schedule that will be executed every weekday, from 12:00:00AM to 11:59:59PM. Edit: Edit the start and end time of the selected schedule item. OK: Save settings in this tab. 22 7. 1. 1. 3 Audio Please note that ZVC7611/ZVC7611W doesn't support audio function. Audio tab is not working for ZVC7611/ZVC7611W. 23 7. 1. 1. 4 Motion Record With Motion Record function activated, only motions captured by selected camera will be recorded. WARNING: For applications that security is highly concerned, it's not recommended to use this function since some tiny changes may not be able to trigger the camera and the camera will not start recording. Channel: Select the channel number you wish to set. Recording Time: Select the time duration from dropdown menu in seconds. Invoke alarm when motion is triggered: Send an alarm when a motion has been detected by ZVC7611/ZVC7611W. [. . . ] Send Recording File to E-Mail: Select Yes to send the recorded video file to your E-Mail account specified at E-Mail & FTP menu. Send Recording File to FTP: Select Yes to send the recorded video file to your FTP server specified at E-Mail & FTP menu. 46 8. 6 System System page allows users to setup parameters, firmware upgrade and reset tools. Camera Information Camera Name: Default value is IP Camera / Wireless IP Camera. Date / Time Setting Set Date/Time manually: Display current Date and Time. Utilities Upgrade Firmware: Click Browse to find the correct firmware and then click Upgrade. [. . . ]