User manual ZONET ZVC7610

[. . . ] Table of Contents CHAPTER 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 1 PACKAGE CONTENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 2 KNOW YOUR ZVC7610. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. 3 FEATURES AND BENEFITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Event Server Setting>> FTP FTP - Host Address: Enter the IP address of the target FTP server - Port Number: Enter the port number for the FTP server - User Name: Enter the user name to login to the FTP server - Password: Enter the password to login to the FTP server - Directory Path: Enter the destination folder for uploading the images, for example: /Test/ - Passive Mode: Select Enable to enable the passive mode - 22 - Event Server Setting >> Email Email - SMTP Server Address: Enter the mail server address, for example: mymail. com - Sender Email Address: Enter the email address of the user who will send the email, for example: John@mymail. com - Sender User Name: Enter the sender email address username to login the mail server - Sender Password: Enter the sender email address password to login the mail server - Receiver #1 Email Address: Enter the first email address of the receiver who will receive the email - Receiver #2 Email Address: Enter the second email address of the receiver who will receive the email 4. 7 Motion Detect The Motion Detect menu contains the command and option that allow you to enable and setup the motion detection feature of the ZVC7610. To enable the detecting areas, select Window 1 or 2 from the drop-down list, and select Enable. When the detecting area(s) is enabled, you can use the mouse to move the detecting area(s) and change the area coverage. - Name: Assign a name of the detecting area(s) - Threshold: Move the slide bar to adjust the level for detecting motion and record video - 23 - 4. 8 Event Configuration The Event Configuration menu contains four sub-menus that provide commands to the configure event profiles. Event Configuration >> General Setting - Snapshot/Recording Filename Prefix: You can assign a given prefix to each new captured file. Event Configuration >> Arrange Schedule Profile This sub-menu displays the scheduled profile(s). To customize the profile, click Add and enter a description for the profile in the prompt dialog window. Click Delete to delete the selected profile from the list. - 24 - - Profile Name: Display profile name(s) that you added to the Schedule Profiles list - Weekdays: Select the day(s), Monday to Friday, which you want to assign in the schedule profile separately. Assigned weekday(s) will display in green color - Time List: Display the period of time that you have assigned within the selected weekday(s). Click Add this to all weekdays to assign the same period of time to every weekday(s). Click Delete this from all weekdays to remove the selected period from every weekday(s). - Start/End Time: Enter the start and end time and then click Add to assign a time period within in the selected weekday. Event Configuration >> Motion Detect Trigger Select Enable option to enable the trigger function of the ZVC7610 to send captured images of the detecting area(s) to an FTP server, email receiver, Network Storage server, or any connected USB device. - Schedule Profile: Select a Schedule Profile from the drop-down list. - Action: Select a destination for the captured images to be sent to: Send Email or FTP Upload. Event Configuration >> Schedule Trigger You can configure the schedule for trigger function of the ZVC7610 separately with Email, or FTP. Select Enable option on each item, then select a Schedule Profile from the dropdown list and set the Interval time. - 25 - 4. 9 Tools The Tools menu provides commands that allow you to restart and/or reset the ZVC7610. You can also backup, restore your configuration, and upgrade firmware for the ZVC7610. Factory Reset Click Reset to restore all factory default settings for the ZVC7610. Configuration You can save your ZVC7610 configuration as a backup file on your computer. Backup: Click Get the backup file to save the current configuration of the ZVC7610 to your computer. - Restore: Click Browse to locate the backup file and click Restore the configuration of the ZVC7610. - Select the firmware: Click Browse to locate the updated firmware file and click Update. Otherwise, the original firmware may corrupt due to the failure of firmware upgrade. - 26 - 4. 10 Information The Information menu displays the current configuration and events log of the ZVC7610. Device Info Display the Basic, Video, and Network settings of the ZVC7610. System Log This table displays all events log recorded by the system. - 27 - CHAPTER 5 APPENDIX A. 1 Specification Image Sensor Sensor Resolution Video Compression Video resolution System Hardware Processor RAM ROM Power Communication LAN Protocol support User Interface LAN Reset Software OS Support Browser Software 1/4" color CMOS 640x480 MJPEG VGA/QVGA/QQVGA; 30fps max. ARM9 base 16MB SDRAM 4MB NOR Flash DC 5V 10/100Mbps Fast Ethernet Auto-sensed, Auto-MDIX TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, PPPoE, UPnP One RJ-45 port One Reset button Link LED (green) Windows 2000/XP/Vista, Macintosh OSX Internet Explorer 6. 0 or above, Mozilla Firefox 2. 00 or above, Apple Safari 2 or above Ultra View for playback/ Recording/configuration features Operating Environment Temperature Operation: 5°C ~ 45°C Storage: -15°C ~ 60°C Humidity Operation: 20~85% non-condensing Storage: 0% ~ 90% non-condensing - 28 - A. 2 Glossary of Terms NUMBERS 10BASE-T 100BASE-TX A ADPCM 10BASE-T is Ethernet over UTP Category III, IV, or V unshielded twisted-pair media. [. . . ] R RJ-45 Router RTP RJ-45 connector is used for Ethernet cable connections. A router is the network software or hardware entity charged with routing packets between networks. RTP (Real-time Transport Protocol) is a data transfer protocol defined to deliver live media to the clients at the same time, which defines the transmission of video and audio files in real time for Internet applications. RTSP (Real-time Streaming Protocol) is the standard used to transmit stored media to the client(s) at the same time, which provides client controls for random access to the content stream. [. . . ]