User manual ZIBRO SRE178E

[. . . ] Note: To avoid unexpected shut off, we recommend to put a door or window ajar when the heater is operating. For each Zibro model the minimum size of space is specified in which you can use the heater safely, without additional ventilation (refer to Section Q). if a particular Only the use of the correct fuel will ensure safe, efficient, and comfortable use of your Zibro. Room is smaller than the specified space, always leave a window or door slightly ajar (± 2. [. . . ] 2 Use the adjustment keys Use the key on the left ( To set the time at which the heater must ignite. Hour) to set the hours and the key on the right Again and the TIMER indicator light will light up, indicating that the timer function has been activated (Fig. When you want to switch off the heater and ignite it again with the timer, all you have to do is press the TIMER key (refer to Section G). The information display will show the CLOCK , when you want to switch off the heater and ignite it 2 Press the TIMER key again with the timer the next time. This not only switches off the heater, but it also activates the timer function. You can change the required time with the adjustment keys (refer to Section F). The information display ¹ not only serves as an indicator of the (set) time and temperature (Sections C, E, and F), it also indicates any malfunctioning of the heater. The code on the information display tells you what is the matter: WHAT TO DO INFORMATION CODE e- 0 Temperature within the heater too high. In case of any malfunctioning the information display will tell you what is the matter. The heater has been in operation continuously for a period of 69 hours and has turned itself off automatically. Always contact your Zibro Kamin dealer for any malfunctioning not listed above. This heater is fitted with a safety system that ensures that it switches off automatically after 69 hours continuous operation. If desired, you can switch the heater on again by pressing (see Section D). When te heater has been burning continuously for two hours at its highest setting, the burner will automatically start an autoclean procedure. the display will show the autocleaningcode cl:05 running back to cl:00. The procedure takes 5 minutes, during which the heater will burn at its lowest setting, while the burner autocleans. When the burner is clean again, the heater will automatically switch I: When the KEY-LOCK light lights up, the childproof lock has been activated. The childproof lock can be used to prevent children accidentally changing the heater settings. When the heater is burning and the childproof lock is on, the heater can only be switched off. If the heater has already been switched off, the childproof lock also prevents accidental ignition of the heater. Activate the childproof lock by pressing the appropriate key and holding it down for more than 3 seconds. Switch off the childproof lock by pressing the key and holding it down for more than 3 seconds once again. [. . . ] * Highly inflammable substances may induce uncontrollable burning, causing flames to break out. Should this happen, never try to move the heater, but always switch off the heater immediately. In case of emergency you may use a fire extinguisher, but only a type B extinguisher: a carbon dioxide or powder extinguisher. 1 2 3 4 Make sure that children are always aware of the presence of a burning heater. [. . . ]