User manual ZENITH H25C39Y OPERATING GUIDE

[. . . ] machine numbers H19C 34DT H25C 39Y H20C 34 DT H 2 5 C3 4 DT C oncie rge T M TV s ® table of contents page 5 enjoy the view installation & operating guide / warranty Copyright 2000, Zenith Electronics Corporation. RECORD YOUR MODEL NUMBER The model and serial number of the ConciergeTM TV are located on the back of the TV cabinet. For your future convenience, we suggest that you record these numbers here: MODEL NO. ____________________________________ SERIAL NO. ____________________________________ WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] Just press and hold MENU (about 8 seconds) until the display changes, then press 9, 8, 7, 6, then ENTER. Or, access an item directly by entering the line number, then pressing MENU. For example, to access the Start Channel option which is on line 11, press 11, then MENU. To change a current setting use the Left/Right ADJ keys. 1390-00 1. 30 01 03 POWER MANAGE 0 Using the Installer's Menu Items 00-24 are immediately accessible only upon entering the Installer's Menu. Their numbers, descriptions, ranges, factory default settings, and a place for listing any changes made on-site are given below. A second section of the Installer's Menu that is intended for qualified service technicians only is not shown (items 25-60). Normally these items do not require adjustment. XX/XX/XX TE = 10110000 Items in the Installer's Menu: Item 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Description FACT MENU PRESET PX PRESET AX POWER MANAGE VERT POS HORZ POS BAND/AFC MIN VOLUME MAX VOLUME AC ON KEY DEFEAT STRT CHANNEL STRT VOLUME HOSPITAL MODE CHAN LOCK GHOST CH. OVER RIDE OLD OCV CAPTION LOCK FUNCTION PRE FEATURE LEVEL Range 0-1 0-1 0-1 0-7 0 - 30 0 - 45 0-7 0 - 63 0 - 63 0-1 0-1 0 - 255 0 - 63, 255 0-2 0-1 0-1 0-3 0-1 0-1 0-1 0-1 0-1 0-1 0-1 0-1 Fact. Set 1 1 1 0 15 15 0 0 63 0 0 255 255 0 0 0 0 1 1 1 1 0 0 0 1 Zen 1/0 P Lbl Installer should leave item 00 FACT MODE set to 0 (default). Items 25-60 are service-type adjustments and only qualified technicians having specialized test equipment should access them. Recommend. Setting Leave default set 1 Leave default set 0 Leave default set 0 Leave default set 1 (1 Zen 1) PAGE 28 206-3599 Installer Menus Use the Installer's Menus to make TV operation adjustments 00 FACT MENU (Factory Mode) Used to access and customize the 00 - 24 Installer's Menu settings using installer type remotes. 01 PRESET PX (Preset Picture) Saves your custom video settings (color, tint, contrast, and brightness) in nonvolatile memory (not affected by power loss). Memory status is indicated by a 1 for "custom settings already stored, " or 0 for "custom settings have not been stored. " Make all custom video settings before you access the Installer's Menu and PRESET PX. When you use the ADJUST keys to toggle from 0 - 1, any changes in the video settings will be stored sure they are correct!These settings become the PRESET values for the PICTURE PREF option of the Video Menu. (For more information refer to the Video Menu section of this manual. ) 02 PRESET AX These TVs are monaural audio only. Since monaural operation is only mode available, leave default setting. 03 POWER MANAGE (Power Management) The POWER MANAGE function is for saving energy. Settings range from 0 - 7, with 1 - 7 representing the hours that the TV will remain on, unless there has been activity from either the control panel or remote. One minute before turning off, the message "PRESS ANY KEY TO KEEP TV ON" appears. 04 VERT POS (Vertical Position) Moves captions and displays vertically on the screen. 05 HORZ POS (Horizontal Position) Moves captions and displays horizontally on the screen. [. . . ] Such replacement parts are warranted for the remaining portion of the original warranty period. Warranty service for 20" diagonal (U. S. A. ) or larger screen size models is provided in the lodge in most cases. (Some repairs may require the unit to be taken by the servicer to the repair facility and returned, at no additional charge. ) This warranty covers manufacturing defects and does not cover installation, adjustment of customer controls, installation or repair of antenna systems, cable converters or cable company-supplied equipment; it also does not cover damage due to misuse, abuse, negligence, acts of God or other causes beyond the control of Zenith. Any alteration of the product after manufacture voids this warranty in its entirety. [. . . ]