User manual ZENEC ZEM-560U

[. . . ] The flawless function of the ZEM-560U can only be guaranteed, if you are using the included original accessories. Take special care of sharp edges during the installation process in order not to damage the connection cables or the accessories, for example the TMC module. [. . . ] do not excessively bend , buckle or even squash the connection cables. If you want to use the external microphone, remove the violet jumper (No. Now plug in the violet connector with the external microphone instead of the jumper. If you want to use the internal microphone again, simply swap the external mic connector and use the jumper again. Pls check if all plug-and-socket connections are correctly connected and well engaged, before you start with the final installation of the ZEM-560U. Unlock the installed radio from the center console using the appropriate special tool. After you removed the OE radio, connect all necessary new cables according to steps 1 - 3. Also make sure you have the media-link box and the GPS antenna properly placed. In order to do so, push the left and right hand metal holders slightly upwards and pull the air condition control out of the center console. Now plug the available cable connectors into the ZE-5010 and settle it back into the center console. [. . . ] Now plug the available cable connectors into the ZE-5010 and settle it back into the center console. There is a dividing girder inside the center console which might cause it to be a very tight fit. [. . . ]