User manual ZENEC ZE-NC514

[. . . ] Failure to follow the instructions within this manual will void your warranty. Do not disassemble or alter the unit in any way, because that will also void your warranty. Do not attempt to repair or to service the unit yourself, but contact an authorized ZENEC dealer instead. Use only original accessories which are designed and manufactured for the unit, otherwise you will risk to damage it. [. . . ] After 15 seconds of idling, the audio menu returns you automatically to the current audio source. ASP (AUDIO SIGNAL PROCESSING) SETUP MENU The ASP con guration menu allows you to make some ner audio adjustments. When the bass center frequency is selected, adjusting the bass Q-factor alters the perceived "weight" of the bass output. Choose "Large", if you want to use your speaker system in full range mode. Choose "Small", if you want to use your speaker system in high pass mode. the high pass mode is activated automatically , if you select "Small". The high pass frequency is identical with the subwoofer's low pass frequency. Settings Options Adjusts Start Volume Last Function The unit starts with the volume, which was adjusted with the menu item"start vol adjust". The unit starts with the volume, which was adjusted before it was turned off. Function Touch "Yes" to enter the touch screen calibration mode. PG-13: A movie rating that allows admission of persons of all ages but suggests parental guidance in the case of children under the age of 13. The unit will auto seek the next available PTY by increasing tuning frequency until the program type matches the PTY, if no match is found, the tuner will return to original radio and "None" is displayed. Preset radio stations: Touch to recall preset stations or touch and hold to store a station, (total 6 stations for each band). The unit automatically switches between mono and stereo, depending on the reception quality of the radio station. Touch to change among the following bands: FM-1, FM-2, FM-3, AM-1, AM-2. If no operation has been entered for 10 seconds, these icons will be automatically hidden. Select the repeat point A whenever you want to start and the point B whenever you want to end. Touch to choose a language, if the disc is recorded in multiple languages. Keep touching and releasing the button to increase the rate from "2X" to "4X", "8X", and "16X". nOTES: If the parental lock is activated, you need to enter the code to playback the DVD disc. The DVD video cannot be displayed on the screen, if the parking brake is not engaged. Insert the SD or SDHC card (up to 8 GB) into the SD-card slot and enter the SD card mode. [. . . ] Read the separate navigation software manual for more detailed instructions. The volume of your audio source will be automatically lowered for the navigational voice output. It's possible to adjust the volume of the navigation voice with the PWR/VOL rotary knob during output. The unit has a splitscreen mode, which can be used in the following playing modes: Tuner, USB (audio), iPod (audio) and SD card (audio). [. . . ]