User manual ZANUSSI ZFT410W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ZANUSSI ZFT410W. We hope that this ZANUSSI ZFT410W user guide will be useful to you.


ZANUSSI ZFT410W : Download the complete user guide (659 Ko)

You may also download the following manuals related to this product:

   ZANUSSI ZFT410W (188 ko)
   ZANUSSI ZFT410W (673 ko)
   ZANUSSI ZFT410W (691 ko)
   ZANUSSI ZFT410W (178 ko)
   ZANUSSI ZFT410W (691 ko)
   ZANUSSI ZFT410W (673 ko)
   ZANUSSI ZFT410W (189 ko)
   ZANUSSI ZFT410W (190 ko)
   ZANUSSI ZFT410W (670 ko)
   ZANUSSI ZFT410W (673 ko)
   ZANUSSI ZFT410W (691 ko)
   ZANUSSI ZFT410W (673 ko)
   ZANUSSI ZFT410W (178 ko)
   ZANUSSI ZFT410W (177 ko)
   ZANUSSI ZFT410W (691 ko)
   ZANUSSI ZFT410W BROCHURE (76 ko)

Manual abstract: user guide ZANUSSI ZFT410W

Detailed instructions for use are in the User's Guide.

[. . . ] The information marked with this symbol provides additional instructions and practical tips on the use of the appliance. Tips and information about economical and ecological use of the machine are marked with this symbol. Our contribution to the protection of the environment: we use recycled paper. 2 Warnings ENGLISH The following warnings are provided in the interests of overall safety. You must read them carefully before installing or using the appliance. Installation · All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. [. . . ] Plug the open holes with the plugs supplied with the instruction booklet. P1088 P0021 The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will have to purchase a new, longer hose specially designed for this type of use. P0256 P0020 5 ENGLISH Water drainage The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine. In this case, make sure the end cannot come unhooked when the machine is emptying. This could be done by tying it to the tap with a piece of string or attaching it to the wall. Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (1, 65 kW), also taking into account any other appliances in use. The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precaution. Should the appliance power supply cable need to be replaced, this should be carried out by our Service Centre. Please ensure that when the appliance is installed the power supply cable is easily accessible. P0022 In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. the inside diameter of the drain pipe must be larger than the outside diameter of the drain hose. All commonly available washing machine detergents may be used in this appliance: ­ powder detergents for all types of fabric, ­ powder detergents for delicate fabrics (60°C max) and woollens, ­ liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash programme. If using concentrated powder or liquid detergents, a programme without prewash must be selected. The washing machine incorporates a recirculation system which allows an optimal use of the concentrated detergent. Pour liquid detergent into the dispenser drawer compartment marked just before starting the programme. Any fabric softener or starching additives must be poured into the compartment marked before starting the wash programme. 10 Before washing your first load of laundry, we recommend that you run a cotton cycle at 60°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine. 4. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Select the temperature Turn the dial to the required setting. 95 P0004 2. Measure out the detergent Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment . [. . . ] Detergent can also accumulate inside the drawer recess: clean it with an old toothbrush. Refit the drawer after cleaning. Door seal Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. P0038 Drain pump The machine is equipped with a self-cleaning pump which does not need any maintenance. Water inlet filter P1050 If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Screw the hose back onto the tap. Detergent dispenser drawer After a while, detergents and fabric softeners leave deposits in the drawer. To remove the drawer from the machine, press the button in the rear left-hand corner. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ZANUSSI ZFT410W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ZANUSSI ZFT410W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.