User manual YAKUMO HYPERSOUND 156

[. . . ] Do not leave the unit exposed to direct sunlight for long periods of time. Precautions for listening with the Earphones Do not play your earphones at a high volume. If you experience a ringing in your ears, reduce volume or discontinue use. You should be extremely carefully or temporarily discontinue use in potentially hazardous situations. [. . . ] Simply insert the Hypersound 156 into the USB port in either desktop PC or notebook computer. Driver is required for: Windows 98/98 SE Page - 8 - Index PC driver and utility installation Make sure that you first start the software setup from the provided CD before you connect your Hypersound 156 with the USB port!Connection before setting up the device driver will invoke `Add New Hardware Wizard' of Windows 98/98SE. The Hypersound 156 driver and utility cannot be installed using the `Add New Hardware Wizard'!Sometimes a Pop-up window including the "Windows Logo Test" attention appears. This software does not impair or destabilize the correct operation of your system. After completing the installation, please check box [Yes, I want to restart my computer now] and click [Finish] to restart your computer (Windows 98). Click Click Click Click Click Note: The Manual CD-ROM will automatically run and allows you to view manual and install the driver. If this is not the case, then run the "showmenu. exe" file manually. This file is located in the root directory of the Manual CD. Page - 9 - Index USB connection You can transmit files through the USB port of your PC. Make sure your PC support USB devices and you have installed the driver (Windows 98/98SE). Connect your PC directly or by supplied USB extension cable with the Hypersound 156. The PC will automatically find the device when the Hypersound 156 is connected to the PC for the first time. When the USB driver installation is finished, "Yakumo HS156 MP3 Hypersound 156" will appear in [System Properties] >[Device Manager] as shown in the picture below. A removable disk icon is displayed in the "My Computer" window. How to check USB driver: Windows 98, ME: Control Panel -> System -> Device Manager Windows 2000, XP: Control Panel -> System -> Hardware -> Device Manager Sending and deleting files by drag and drop The removable disk icon displayed within the "My Computer" window indicates the memory of the Hypersound 156. You can now save, copy and delete files on the Hypersound 156 by Drag and Drop to the removable disk. Click OK Click Stop Page - 10 - Index Caution: Do not unplug the Hypersound 156 while a file is being downloaded. If the Hypersound 156 does not work, take out the battery and reinsert it after a few seconds. The Hypersound 156 can be damaged when you take unplug the Hypersound 156 during file transmission!When the transfer is finished, the LED light stops and you can unplug the Hypersound 156 safely. Unplugging the Hypersound 156 Windows 98 / 98SE While USB port is busy, the LED is flashing. When the transfer is finished, the LED light stops and you can take out the Hypersound 156 safely. Windows XP Windows XP allows you to disconnect this device without using the Safe Removal icon. [. . . ] If the problem is still there, re-format the memory with the Hypersound 156's utility to clear the memory and try to download again. It could also be Page - 15 - Index a problem of bad encoding or bad source quality. Remember to close all active programs before encoding to achieve good quality results. While positioned at ON, the controls are deactivated. Description of controls Play / Pause Press to turn on; Pressing while in music mode: Pause or Play F. RWD Press to jump to previous music track; press and hold to fast rewind within a track. [. . . ]