User manual YAKUMO CORDLESS DOUBLE II

[. . . ] Only replace with the same type or a type of identical design recommended by the manufacturer. Batteries should never be damaged, drilled or thrown into an open fire. Only use the specified charger for rechargeable batteries. Batteries containing hazardous substances are marked with the above symbol. [. . . ] Step 3: Replace the cover. Installing Batteries in the Keyboard Step1. Remove the battery compartment cover on the bottom of the keyboard by squeezing the cover in from the tab to release it. Replace the cover. Charge the Mouse Your mouse uses 2 AA size rechargeable batteries. Before you use the wireless mouse, you need to place the mouse on the stand to charge the battery for 12 hours, this is very important for battery life. Please make sure the charge indicator is light ON when you charge the mouse. When you feel your mouse does not work smoothly, the battery needs to be charged. Normally it will take 12 hours to get the battery fully charged. Connecting the Receiver The receiver is connected to your computer via a 1. 2-meter USB cable. Connect the receiver's cable to the computer's USB port. Indicators on Receiver There are 5 indicators on the Receiver. When the receiver changes the IDs successfully, the indicator will flash quickly for several times 2. : Charging indicator Date: 2004 / 12 / 28 SN-322 2 /2 Edition: 2 Signed by: Alison Approved by: Connecting the keyboard and the receiver 1. Keep the keyboard away from the receiver about 8 inches, namely 20 centimetres. Press the connect button at the bottom of the keyboard, make sure that the connect indicator flashes fast. If the keyboard does not work, do above steps again. Connecting the Mouse and the receiver 1. Keep the mouse away from the receiver about 8 inches, namely 20 centimetres. Press the connect button on the receiver, connect indicator will flash. Press the connect button at the bottom of the mouse, make sure that the connect indicator flashes fast. If the mouse cursor does not move, do above steps again. NOTE: You need to do above steps to re-connect the mouse, keyboard and the receiver each time you replace batteries. Setting up your Cordless mouse After you have installed the receiver, you are ready to place the mouse on your desktop. Because the mouse uses cordless radio technology, give you considerable freedom of movement and a more enjoyable computing experience. [. . . ] Refer to your computer documentation for the correct port configuration. The Screen Cursors Does Not Move Properly Change the position of your radio receiver, because it may be too far from the mouse or a large metal object may be interfering with the receiver's radio reception. Cannot charge the battery Make sure that the mouse is placed properly on the docking station. If your tabletop surface is highly reflective like a mirror or is not smooth, your tabletop surface will interfere with the optical sensor of the mouse. [. . . ]