User manual YAESU FTDX9000 PEP9000 UPDATE V0521 AND V11.54

[. . . ] If the software version is not immediately displayed, your radio has not been updated to PEP9000; you must have the radio updated. Please contact Vertex Standard, Amateur Tech Support. If your radio meets the above conditions you may proceed to update the Main CPU to V0521 programming and EDSP to V11. 54. We recommend installing the Flash Programming Software on a PC computer with Windows 2000, XP or Vista Operating System; and use the CT-119 programming cable or 8-pin mini-DIN PGM-SW (P0091526) and serial cable RS-232C, DB9F to DB9F straight cable. NOTE: There are many USB adapters available; however some may not function with this software. [. . . ] Unzip and Extract the contents of [FTdx9000_PEP9000_8-26-10. zip] to the desktop of your computer. You will find the PEP9000_EDSP and PEP9000_MAIN folders on your desktop. The programmer and software are now stored on your computer on the desktop. The files designated in the last step above are ready to update your FTDX9000 Transceiver. MAIN Software Update This procedure is used for uploading new Software into the FTDX9000 Amateur Transceivers using the CT-119 program cable. If you have the 8-pin mini-DIN PGM-SW (P0091526) refer to the page 4. *Don't forget to write down (or save to a CF Card) any personal menu settings you have changed from the default before you start. Please see the Data Management Operation Manual for the procedure to save your settings to a CF card. (1) Turn off the main power switch located on the back of the FTDX9000 (or turn off the power supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. (2) Connect the CT-119 cable's DB-9F connector to the serial port COM1 in the back of your computer. Plug the mini-DIN connector of the CT-119 into the ACC jack connector on the rear of the transceiver. If you use a USB to serial adapter, you might need to change the COM-Port number. Main Power SW ACC (3) Connect the AC power cord (in the case of the FTDX9000MP connect the power supply cables). (4) Turn on the main power switch located on the rear panel of the FTDX9000 (or on the top of the power supply for the FTDX9000MP). [NOTE: The radio will not show a display now. ] (5) Now go to the desktop and find the FSW004 as shown below. Double-click the FSW004 icon, displayed on the Program Screen. (6) When the program opens, confirm that the file AH010N_V0521. SFL is highlighted; if not, click on it to highlight it. A green status bar should appear below the [WRITE] button to show the progress of the download. Located on the rear panel of the FTDX9000 (or on the top of the power supply for the FTDX9000MP. Remove the CT-119 cable from the DB-9F connector of your computer and the ACC connector on the rear of the transceiver. (10) Turn on the main power switch located on the back of the FTDX9000 (or on the top of the power supply for FTDX9000MP). (11) Press and hold in the [FAST] and [LOCK] keys while turning the radio back on. Follow the instructions below to update the EDSP. 8-pin mini-DIN PGM-SW 1. I choose the . sfl file of the version 0521to write in and push WRITE of the screen. Reset the radio to default. NOTE: for a more detailed description see the Main CPU programming. EDSP Software Update This procedure is used for uploading new EDSP Software into the FTDX9000 Amateur Transceivers, from your personal computer, using the RS-232C, DB9F to DB9F straight cable. Turn off the main power switch located on the back of the FTDX9000 (or turn off the power supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC power cord. [. . . ] The updating process is now complete It is important to reset the FTDX9000. Press and hold in the [FAST] and [LOCK] keys; while holding them in, turn the radio back on (this resets the radio and locks in the new software). NOTE: We recommend trying the new factory default settings rather than transferring your old ones, because of the changes in the EDSP and the Main CPU, you may wish to make new settings. We hope this new software will increase your enjoyment of your FTDX9000. If you have any problems or questions please contact Vertex Standard, Amateur Tech Support. [. . . ]