User manual XENA XZZ6L

[. . . ] By purchasing the world's strongest, smartest portable lock (with alarm inside), you've made life very difficult for a would-be thief. If you have any questions or comments, don't hesitate to email us at info@xenasecurity. [. . . ] The alarm sensors will become active 5 seconds after being locked on your brake-disc. Alarm not sensitive enough: Place at 12 o'clock to 3 o'clock on disc. Use a dry cloth to keep the LED reflector plate inside the disc-slot clean and free of dirt, dust, grease and grime. An obstructed reflector plate can adversely affect performance and may cause the lock to arm when not on the brake disc. ⷠIt is recommended to add a lock lubricant to the lock barrel every six months. The alarm module can be replaced with a new unit from your local authorised XENA dealer or email: info@xenasecurity. com · Note: the lock will continue to function as an effective anti-theft device, with or without the alarm system. To avoid draining the battery when not in use, your XENA disc-lock alarm has a standby mode. ⷠUsually, the metal-on-metal contact from simply locking the lock onto your brake-disc is sufficient and the unit will arm normally. ⷠSometimes it may be necessary to wake up the arming sensor by firmly locking and unlocking the key barrel once or twice. [. . . ] ⷠ10 seconds after you hear the arming beep, the shock and motion sensors are active. Alarm not arming: Check battery, Ensure the reflector (fig C) is obstructed by motorcycle disc, confirm sensors are active (see below). [. . . ]