User manual XACT XS027 INSTRUCTION MANUAL

[. . . ] Sound System Deluxe Portable Boom Box Rotating Console CD player and AM/FM radio on side Satellite radio receiver and remote control on the flip side!> CD Player with CDRW and MP3 Playback > AM/FM Radio with 10 Presets Instruction Manual Model XS027 To activate your Satellite Radio Receiver or for latest news and questions regarding SIRIUS® Satellite Radio service visit sirius. com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www. getxact. com. KEEPONLISTENING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Within ten seconds, select the desired preset using the PRESET UP (14) or DOWN (15) button to set the memory. To receive a preset station, simply press the PRESET UP (14) or DOWN (15) button to select the desired preset. 10 12 13 2. 3. 11 14 15 9 CD OPERATION To Insert and Play a CD This CD player is designed to play all kinds of Audio Discs and MP3 CD ROMS, such as CD recordables and rewritables. Gently press a disc, label side up, onto the spindle until it locks in place. Press the PLAY/PAUSE to begin playback; the current track and elapsed playing time (CD information and folder will also appear, if using MP3) will appear in the display. Press the STOP button to stop the disc before it is finished. CD Playback Notes: · See page 14 for more information on MP3's. . · When recording ("burning") CD's, make sure the session is "finalized" or simply record "burn" only one session. · This unit is capable of playing standard CD's or 3" singles; no adapter is required. 12 13 15 · If a disc is inserted incorrectly, dirty, damaged or not present at all, "No Disc" will appear in the display. · Playback will stop when you open the CD compartment, but it is not recommended to open the compartment before the STOP button is pressed. · When recording ("burning") CD's, make sure the session "finalized" or simply record "burn" only one session. · It may take 10 to 30 seconds for the player to read an MP3 CD and begin playback, depending on the number of tracks burned on the CD. · If a disc is inserted incorrectly, dirty, damaged or not present at all, "No Disc" will appear in the display. is 10 CD OPERATION To Pause a CD 1. During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE button. Playback stops but the disc continues to spin and the elapsed time will blink in the display. Press the PLAY/PAUSE button again to release pause and resume playback. The sound returns and the elapsed time in the display stops flashing. 12 13 15 To Begin Playback from a Specific Track 1. After you insert the disc into the CD player and total number of tracks appear on the display, you may press either the Skip/TUNING DN (12) or UP (13) button to select a specific track for playback. When the desired track number (and file number if using MP3) appears in the display, press the PLAY/PAUSE button. Playback will begin with the track (or file) you selected. Forward/Reverse Skip Track 1. During playback, press and release the Skip/TUNING UP button once to advance the player to the beginning of the next track. Press the Skip/TUNING UP button repeatedly to advance the player to higher number tracks. During playback, press and release the Skip/TUNING UP button once to move the player back to the beginning of the currently playing track. [. . . ] At least once every 30 days of use, perform the following checks: · Inspect the Receiver connector for loose, bent or broken pins, misalignment, etc. ; make sure the SAT connector is intact and exhibits no apparent damage. . · Check the VOL control for freedom of motion without binding of any kind. · Check that the SAT/Audio Selector operates correctly and that it toggles between the Satellite Radio output and the Audio output. · Make sure the antenna connector at the rear of the unit is free from damage of any kind and that the antenna lead plug mates correctly and securely. [. . . ]