User manual XACT STREAM-JOCKEY XTR1 INSTRUCTION MANUAL

[. . . ] Instruction Manual Model XTR1 To activate your Satellite Radio Receiver or for latest news and questions regarding SIRIUS® Satellite Radio service visit sirius. com or call 1-888-539-SIRIUS (7474). For accessory & product information visit us at www. getxact. com. KEEPMOVING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Each time you press the to "Song Title" cyclically. Channel Channel Channel Channel Channel Channel Name Name Name Name Name Name Artist/Composer Artist/Composer Artist/Composer Artist/Composer Artist/Composer Artist/Composer Song Song Song Song Song Song Title Title Title Title Title Title 5. Press the button to confirm the setting. 16 S-Seek Function_MEMO (Memory Search) Button When in this mode, you can activate the memory search function. This will instruct your satellite radio to search the current incoming SIRIUS® signal and alert you when a song you have saved is being played. Memory s 1/10 Artist Song To Store the Information Under the Normal Operation mode or the Preset Tuning mode, press the data information is recorded in memory and the capacity status is displayed. 001 Channel Name 001 button. The current program Channel Name Artist Stored Song Category 12:00P A Artist Empty X Used/Y Song Category 12:00P A What If You Have Already Recorded the Same Artist/Song? Your satellite radio automatically checks your recorded data information and compares it with the newly selected program. If the newly selected program has already been recorded, to avoid duplication no entry will be made. 001 Channel Name Artist Already Stored Song Category 12:00P A 17 What If the Program Storage is Full? If the Program Storage is full, a "Memory Full" message will pop up on the screen for a moment, followed by a "Replace" or "Cancel" message. Under Normal Operation mode or in Preset Tuning mode, press the 001 Channel Name button. Memory Full Replace Cancel ArtistFull Memory Song Category 12:00P A Category 12:00P 2. Press the or button to select either "Replace" or "Cancel". button to confirm the setting. Replace: Do the following to select the program to be overwritten with the new Artist/Composer or Song Title. Press the button, and the follow-up screen will be displayed. Replace Artist/Song Title Artist/Song Title Artist/Song Title Artist/Song Title Artist/Song Title 3b. button to replace with the new selection. Cancel: To avoid overwriting the stored selection, wait for the original screen to be displayed again. 18 Performing the S-Seek Function Whenever you turn your satellite radio on, it automatically searches the incoming signal to determine if a match exits between the signal and the artist/composers or song titles that you have recorded in memory (except when S-seek is set to Off). 1. Select "Off" (to deactivate the programs searching) or "On" (to activate the program searching) by using the or button, then press button to confirm the setting. Memory Recall Delete S-Seek Category 12:00P S-Seek On Off Category 12:00P Deleting the Recorded Programs (Artist/Song) 1. The recorded programs list is displayed. button to scroll through programs. button again to confirm the setting. Memory Recall Delete S-Seek Category 12:00P 19 Delete Yes No Category 12:00P MENU OPTIONS SETTINGS The following options are included on the Menu Options list: · SIRIUS® ID · Display Settings · FM Transmitter · Channel Add/Skip · Lock Options · Audio Level · Antenna Aiming · Memory Options · Time Features · Factory Default BASIC SETTING PROCEDURE 1. or button to select a desired item button, and the selected Option Setting pops up. 4. Set the Option Setting to your preference according to the steps described below. To exit the Menu Options list, press and hold the button. SIRIUS® ID Refer to "Make a Note of Your Identification Number" for details. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P 20 Display Settings Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P The following adjustments can be made: · Brightness Control · Contrast Control Brightness Control: A 10-segment horizontal bar graph is displayed. By pressing the or action, you will return to the Menu Operations list. Brightness Control or left/right directional button or by taking no - + Contrast Control: A 10-segment horizontal bar graph is displayed. Move the or left/right directional button to adjust the contrast control function accordingly. By pressing the or button or by taking no action, you will return to the Menu Operations list. Contrast Control - + 21 FM Transmitter Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P The following adjustments can be made: · Frequency · FM On/Off FM Transmitter Frequency FM On/Off Category 12:00P Frequency: enables you to select any one of the pre-programmed FM channels. Press the or button to select a desired channel, then press the button to confirm the setting. To exit this function, press or button. Frequency 88. 1 MHz 88. 3 MHz 88. 5 MHz 88. 7 MHz 88. 9 MHz FM On/Off: To activate/deactivate the FM transmitter. FM On/Off On Off Category 12:00P 22 Channel Add/Skip You can add or skip new/unwanted channels while tuning. When you enter this option, a channel list is displayed, and the current channel playing will be highlighted. Menu Options Sirius ID Display Settings FM Transmitter Channel Add/Skip Lock Options Category 12:00P 001 002 003 004 005 006 Channel Channel Channel Channel Channel Channel Name Name Name Name Name Name Skip Skip Press the or button to navigate the list and highlight the channel you want to skip, then press the button to confirm the setting. [. . . ] button to 33 Items revert to their original factory settings as follows: All Presets revert to empty Display Dimming to 70% Display Contrast to 50% FM Transmitter to "On" Audio Output Level to 50% Access to all skipped streams restored Memory Search On Memory locations will be erased 12-Hour Clock Format Eastern time zone Daylight savings time observed Alarm Off Alarm Time 12:00pm Program Alert Time 12:00pm Program Alert Day Monday Program Alert Channel Number (current) Auto Shutdown Off Sleep Mode Off Default Font Size/Type "5x7" All preset channels and stored artists/composers and songs will also be removed, and all skipped channels will become "un-skipped" (locked channels remain locked). 34 DISPLAY MESSAGES Acquiring Signal When the audio signal is lost, a pop-up window with the message "Acquiring Signal" is displayed until the signal is recovered. 001 Channel Name Acquring Signal Category A Antenna Not Detected When no antenna is detected and the signal is lost, a pop-up window with the message "Antenna Not Detected" is displayed until an antenna is detected and the signal is acquired. 001 Channel Name Antenna Not Detected Category A Updating Channels When a GCI (Global Control Information) update from the SIRIUS® broadcast system is detected, a pop-up window with the message "Updating Channels X% Completed" is displayed until the GCI update is complete. Updating Channels X% Completed 35 Subscription Updated When a subscription update (PSV) from the SIRIUS® broadcast system is detected, a pop-up window with the message "Subscription Updated Anykey to Continue" is displayed for at least 3 seconds. 001 Channel Name Artist SubscriptionUpdated Anykey to Continue Song Category 12:00P A Mute A single press of the "Mute" button will temporarily disable all analog and digital outputs from your device. Use your remote control to implement this operation. Artist Song Keypad Lock 001 Channel Name 001 Channel Name 001 Channel Name 001 Channel Name 001 Channel Name Category 12:00P A You can temporarily lock the panel or front panel controls of your XACT Stream Jockey satellite radio receiver. Simultaneously press the and volume control buttons to activate the keypad lock function. Artist Song 001 Channel Name 001 Channel Name 001 Channel Name 001 Channel Name 001 Channel Name Category 12:00P A 36 PROBLEM SOLVING Problem Solving Section For your assistance, we have listed a few common problems below. The Satellite Receiver does not work. Make sure you have contacted SIRIUS® to activate your Satellite Radio subscription 1-888-539-SIRIUS (7474). [. . . ]