User manual X10 IN55A QUICK SETUP GUIDE

[. . . ] Multi-Camera System Quick Setup Guide (refer to instructions packed with each item for more detailed information) Pip G Look for a box that contains the XCam camera. [. . . ] G Point the "pip" on the Camera's antenna and the "squares" on the Receiver's antenna towards each other for the best reception. G If you experience interference, try setting the Camera and Receiver to a different letter channel (A, B, C, or D) - use the same letter on each (see instructions included with them for more information). G If you have two Receivers you can see the same Camera on two different TVs. G Look for a box that contains the Transceiver G Unpack the Transceiver and plug it into any AC outlet. G Press the button on the front of it and check that it "clicks. " G Fully extend the antenna. G Look for a box that includes the remote control, and remove it from the box. The Transceiver will click, and if the camera's power supply (in step above) is set to number 1 it will also turn on and off. G If the camera doesn't turn on or off, try plugging the Transceiver (step ) into a different AC outlet. [. . . ] For more information or help setting up your system, please visit www. x10. com/support GUIDE IN55A u<0* !)"=dhaeiF<z Copyright 2001, X10 Wireless Technology, Inc. [. . . ]