User manual X10 IN54A SETUP

[. . . ] Setting Up a Wired Camera and Video Sender Connect the Video Receiver to Your TV or VCR These steps will guide you through connecting the VR30A video receiver to your TV or VCR so that you can watch video picture on your TV. [. . . ] Connect the camera's power supply (model XM10A) to the camera and plug it into an AC outlet. Attach the camera to a wall in the location you want to monitor using the supplied mounting bracket. Adjust the antenna on the Video Sender, if necessary, to aim it in the direction of the TV. Make sure that the Channel selector on the underside of the VT32A is set to the same letter as that on the VR30A video receiver and switch the Power switch to the On position. Plug the yellow video plug on the supplied RCA cable (the one with yellow, red and white connectors on both ends) into the Video Out jack on the VR30A Video Sender receiver. Connect the other end into the yellow video input jack on your TV or VCR. Connect only the white plug on the RCA cable to the Audio Out connections on the video receiver. Plug the other white plug into the white audio input on your TV or VCR. [. . . ] Notes: MODEL NUMBER: IN54A Copyright 2001 X10 Wireless Technology, Inc. [. . . ]