User manual X10 IN37A SETUP

[. . . ] SETUP INSTRUCTIONS Setting Up an X10® Multi-Camera System up, turn it off using your CR12A. [. . . ] Connect the Firecracker Computer Interface The Computer Interface (model CM17A) uses wireless signals to transmit X10 control commands from the computer to the transceiver module included in the kit. If there is already a device connected to this port, unplug it, connect the Computer Interface, and then plug the other device into the connector on the CM17A. Set Up Your Cameras Set the House and Unit code on the addressable power supply (model XM10A). All of the cameras you set up will be set to the same letter (House) code, and each will have its own number (Unit) code. The camera should come on and you should be able to get the picture on the TV. Adjust the antenna so that it points better at the antenna of the receiver. When the camera is set Configure Your Cameras in XRay Vision Run XRay Vision. Right click in the program window and choose "Settings" then "Preferences" from the pop-up menu. [. . . ] For more help, see: http://www. x10. com/support MODEL NUMBER: IN37A ©Copyright 2000 X10 Wireless Technology, Inc. [. . . ]