User manual X10 IN35A SETUP

[. . . ] Setting Up Entertainment Anywhere Please Read These instructions are intended to complement the instructions provided for each componenet in this kit. Please read each set of instructions provided. X10's Entertainment Anywhere allows you to play DVDs, MP3s and CDs from your PC through on your home theater. [. . . ] Note: If your DVD decoder card does not have an RCA video output, you will need to obtain the correct cable from the DVD maker or an electronics store. Connect this output to the video sender left and right Audio In plugs using a 1/4-inch stereo jack to RCA audio cable (supplied with model VK35A kits). If you don't have this cable, you can purchase one at a home electronics store. Connect the PT30A power supply to the DC 12V plug on the VT30A video transmitter. The Video Sender Transmitter is now ready to send your DVD movies to your TV. Place the VT30A in a convenient location and raise the antenna for best reception. Connect the Video Receiver to Your TV or VCR These steps will guide you through connecting the VR30A video receiver to your TV or VCR. Plug the yellow video plug on the supplied RCA cable (the one with yellow, red and white connectors on both ends) into the Video Out jack on the VR30A Video Sender receiver. Connect the other end into the yellow video input jack on your TV or VCR. Connect the red and white plugs on the RCA cable to the respective Audio In connections on the video receiver. Note: If your TV or VCR doesn't have RCA video and audio inputs, you can connect the output of the receiver to the TV using the provided coaxial cable. This will supply both sound and picture to the TV. SETUP INSTRUCTIONS 3. [. . . ] You can now press PLAY, STOP, PAUSE, FF, and REW on the remote to select and play DVDs. Use VOL +, VOL -, and MUTE to control the sound level. MODEL NUMBER: IN35A ©Copyright 2000 X10 Wireless Technology, Inc. [. . . ]