User manual X10 IN25A SETUP
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual X10 IN25A. We hope that this X10 IN25A user guide will be useful to you.
 |
Manual abstract: user guide X10 IN25ASETUP
Detailed instructions for use are in the User's Guide.
[. . . ] Use of the Video to USB Converter requires Windows 95 OSR2. 1 with USB support or Windows 98. [. . . ] Connecting the USB Video Capture Adapter When the installation program instructs you to, plug the Video to USB Converter connector into a USB port on your computer. The computer will recognize that new hardware has been installed and complete the installation. Setting Up the Camera First set the transmission channel on the camera. Remove the rubber cap and use a paper clip to change the setting - A is
at the bottom, D at the top. Next, place or mount the XCam2 in the area you desire and connect it to the power supply. Plug the yellow video plug on the supplied cable into the Video Out jack on the VR30A. Connect the other end of the cable to the yellow Video In jack cable on the Video Capture Adapter. Channel switch on the underside of the VR30A is set to the same letter as that on the XCam2. [. . . ] You are now ready to connect up to your XRay Vision server and download images.
MODEL NUMBER: IN25A [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE X10 IN25A
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual X10 IN25A will begin.