User manual WOXTER BIG BASS 130

[. . . ] The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. Step 1 Checking the contents of the box Digital camera Strap Two AA batteries USB cable Other accessories not shown: warranty card Contents may vary depending on purchase location. WOXTER Setup CD-ROM Step 2 4 Preparing the Camera Step 3 5 Shooting and Playing Back Images "Preparing the Camera" (p. 18) Step How to Use the Camera Step Printing "Camera Settings" (p. 47) Contents Names of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Menus for Playback, Editing, and Printing Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the camera is left for another 12 minutes, it automatically turns off. Wait until #(flash charge) stops blinking before taking pictures. Troubleshooting Battery "The camera does not work even when batteries are installed". "Inserting the battery and the SD/SDHC memory card (sold separately)" (p. 12) If [ALKALINE] is selected with NiMH batteries, the camera may fail to turn on when the batteries are low. Be sure the batteries are fully charged, and select [NiMH] for [BATTERY TYPE]. 41) Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Monitor "Difficult to see". Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. *1 Dew drops can form in the camera when it is suddenly taken from a cold location into a warm, humid room. This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Card/Internal memory "An error message is displayed". Do not operate the printer while making the print settings on the camera. This camera may be unable to print images taken by other cameras. Subjects with low contrast When extremely bright objects appear in the center of the screen 52 EN Camera shake Object with no vertical lines*1 *1 It is also effective to compose the shot by holding the camera vertically to focus, and then returning to the horizontal position to take the picture. When objects are at different distances "Taking pictures without camera shake" Taking pictures using N mode (p. 25) The C (SPORT) mode uses a fast shutter speed and can reduce the blur incurred by a moving subject. Taking pictures at a high ISO sensitivity If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a flash cannot be used. 31) Exposure (brightness) Fast-moving object The subject is not in the center of the frame "Taking pictures with the right brightness" Taking pictures using [FILL IN] (p. 30) Adjust the brightness while viewing the screen for taking the picture. Normally, taking pictures of white subjects (such as snow) results in images that are darker than the actual subject. Use the exposure compensation to adjust in the positive (+) direction to express whites as they appear. When taking pictures of black subjects, on the other hand, it is effective to adjust in the negative (-) direction. EN 53 Color hue "Taking pictures with colors at the same shade as they appear" Taking pictures by selecting white balance (p. 31) Best results in most environments can normally be obtained with the [WB AUTO] setting, but for some subjects, you should try experimenting with different settings. (This is especially true for sunshade under a clear sky, mixed natural and artificial light settings, and so on. ) Playback/Editing tips Playback "Playing images in the internal memory and card" Remove the card when playing pictures in the internal memory "Inserting the battery and the SD/SDHC memory card (sold separately)" (p. [. . . ] Olympus reserves the right to refuse free-of-charge service if neither Guarantee Certificate is completed nor the above document is attached or if the information contained in it is incomplete or illegible. 2 Since this Guarantee Certificate will not be re-issued, keep it in a safe place. com for the authorized international Olympus service network. For customers in Asia Provisions of warranty 1 lf this product proves to be defective, although it has been used properly (in accordance with the written Handling Care and Operating instructions supplied with it), during a period of up to one year from the date of purchase this product will be repaired, or at Olympus's option replaced, free of charge. To claim under warranty the customer must take the product and this Warranty certificate before the end of the one year warranty period to the dealer where the product was purchased or any Olympus authorized service station listed in the instructions and request the necessary repairs. [. . . ]