User manual WHIRLPOOL WCC31430AB INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL WCC31430AB. We hope that this WHIRLPOOL WCC31430AB user guide will be useful to you.


WHIRLPOOL WCC31430AB INSTALLATION GUIDE: Download the complete user guide (349 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL WCC31430AB DIMENSION GUIDE (101 ko)
   WHIRLPOOL WCC31430AB USE & CARE GUIDE (368 ko)
   WHIRLPOOL WCC31430AB WARRANTY INFORMATION (95 ko)
   WHIRLPOOL WCC31430AB OVEN AND COOKTOP COMBINATIONS (75 ko)

Manual abstract: user guide WHIRLPOOL WCC31430ABINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] If you do not find this label, your cooktop may not be approved for use over an undercounter built-in oven. Ovens approved for this type of installation will have an approval label located on the top of the oven. If you do not find this label, contact your dealer to confirm that your oven is approved. Refer to oven manufacturer’s Installation Instructions for approval for built-in undercounter use and proper cutout dimensions. [. . . ] – ■ ■ IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. 2 Product Dimensions B NOTES: After making the countertop cutout, some installations may require notching down the base cabinet side walls to clear the burner box. To avoid this modification, use a base cabinet with sidewalls wider than the cutout. 6 cm) depth clearance from the countertop to the top of the drawer (or other obstruction) in base cabinet is required. 3 cm) Installation Clearances IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface. Failure to follow these instructions can result in death, fire, or electrical shock. If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes. Check with a qualified electrical installer if you are not sure the cooktop is properly grounded. Make sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22. A copy of the above code standards can be obtained from: National Fire Protection Association One Batterymarch Park Quincy, MA 02269 CSA International 8501 East Pleasant Valley Road Cleveland, OH 44131-5575 A D C L B E F G H I K J Before You Make the Electrical Connection: A. 2 cm) minimum clearance between top of cooktop platform and bottom of uncovered wood or metal cabinet. Mounting holes ■ Pull the coil element straight away from the receptacle. Using 2 or more people, gently place the cooktop in cutout so that the cooktop mounting holes align with the 4 pilot holes. – Line up openings in the burner bowl with the coil element receptacle. Remove the 4 screws from inside each element opening and lift cooktop from cooktop base. Holding the coil element as level as possible, slowly push the coil element terminal into the receptacle. When the terminal is pushed into the receptacle as far as it will go, push down the edge of the coil element opposite the receptacle. 4 Make Electrical Connection WARNING 4-Wire Cable from Home Power Supply IMPORTANT: Use the 4-wire cable from home power supply where local codes do not permit connecting the frame-ground conductor to the neutral (white) junction box wire: A Electrical Shock Hazard Disconnect power before servicing. Failure to follow these instructions can result in death, fire, or electrical shock. This cooktop is manufactured with the frame connected to the bare ground wire. Connect the cooktop cable to the junction box through the UL listed or CSA approved conduit connector. Connect the flexible cable conduit from the cooktop to the junction box using a UL listed or CSA approved conduit connector. [. . . ] Connect the green (or bare) ground wire from the cooktop cable to the green (or bare) ground wire (in the junction box) using the UL listed wire connectors. NOTE: Do not connect the bare ground wire to the neutral (white) wire in the junction box. 6 cm) 5 3-Wire Cable from Home Power Supply IMPORTANT: Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire. If there is an extra part, go back through the steps to see which step was skipped. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL WCC31430AB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL WCC31430AB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.