User manual WHIRLPOOL UXT5230AYS DIMENSION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL UXT5230AYS. We hope that this WHIRLPOOL UXT5230AYS user guide will be useful to you.


WHIRLPOOL UXT5230AYS DIMENSION GUIDE: Download the complete user guide (143 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL UXT5230AYS (981 ko)
   WHIRLPOOL UXT5230AYS INSTALLATION GUIDE (981 ko)
   WHIRLPOOL UXT5230AYS (981 ko)
   WHIRLPOOL UXT5230AYS INSTALLATION GUIDE (981 ko)

Manual abstract: user guide WHIRLPOOL UXT5230AYSDIMENSION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING. € These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. [. . . ] Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum. follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices. 5 m) ■ Wire sizes and connections must conform with the rating of the appliance as specified on the model/serial rating plate. The model/serial plate is located behind the filter on the rear wall of the range hood. Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70 (latest edition), or CSA Standards C22. 0 m) 6 INSTALLATION INSTRUCTIONS Prepare Location NOTE: It is recommended that the vent system be installed before hood is installed. Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent. Depending on your model, determine which venting method to use: roof, wall or non-vented (recirculating). Mark a line distance “A” from the right of the centerline on the underside of the cabinet. Mark a line distance “A” from the right of the centerline on the underside of the wall. 5 cm) on either side of the hood center to accommodate off-center ductwork. For direct wire installations, run the home power supply cable according to the National Electric Code or CSA standards and local codes and ordinances. Place the back of the panel into the rear channel and push the panel toward the back of the range hood until the tabs on the front of the panel clear the front mounting flange. Push the front of the panel up into the front mounting flange until the panel tabs align with the slots in the front mounting flange. If range hood does not operate, check to see whether a circuit breaker has tripped or a household fuse has blown. NOTE: To get the most efficient use from your new range hood, read the “Range Hood Use” section. 11 RANGE HOOD USE The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen. A RANGE HOOD CARE Cleaning IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Exterior Surfaces: IMPORTANT: Do not use soap-filled scouring pads, abrasive cleaners, Cooktop Polishing Creme, steel wool, gritty washcloths or paper towels. To avoid damage to the stainless steel, do not use cleaners that contain chlorine. [. . . ] If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies. ONE YEAR LIMITED WARRANTY WHAT IS COVERED For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Replacement Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased, or at its sole discretion replace the product. In the event of product replacement, your appliance will be warranted for the remaining term of the original unit's warranty period. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL UXT5230AYS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL UXT5230AYS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.