User manual WHIRLPOOL UW8 F2Y XBI F

[. . . ] NOTE: The instructions apply to several models, so there may be differences. Sections which only apply to certain appliances are indicated with an asterisk (*). Functions which are dedicated specially for your already bought model of product you will find in QUICK START GUIDE. To guarantee adequate ventilation, leave a space on both sides and above the appliance. [. . . ] 5 hours), the fans will automatically start working and the "Shock Freeze" process will begin as normal. If the indicator does not light up If, after the button is pressed, the icon lights up: in this case the button has been pressed for too long. To activate the "Shock Freeze" function, first deactivate the Fast Freeze function (holding the button for 3 seconds, then briefly touch the button, without keeping it pressed for more than 1 second. The amount of fresh food (in kg) that can be frozen in 24 hours is indicated on the appliance rating plate. This function can be used for optimum appliance performance, 24 hours before placing fresh food in the freezer Please follow the instructions contained in the Quick Start Guide to activate/deactivate the function. After placing fresh food in the freezer, 24 hours on Fast Freeze function is generally sufficient; After 50 hours the Fast Freeze function automatically deactivates. Attention: In order to save energy, when freezing small amounts of food, the fast freeze function can be deactivated after a few hours. Please check on the QUICK START GUIDE if this function is actually available on your model. Incompatibility with the "Shock Freeze" function To guarantee optimal performance, the "Shock Freeze" and "Fast Freeze" functions cannot be used at the same time. Therefore, if the "Fast Freeze" function has been already engaged, it has to be disengaged first to activate the "Shock Freeze" function (and vice-versa). The Eco Night function enables appliance energy consumption to be concentrated in the reduced rate hours (generally at night), when electricity is readily available and costs less than during the daytime (only in countries that utilise a time based multi-rate system check energy rates with the local electricity company). To activate the function, press the button at the reduced rate start time (depending on the specific rates plan). Once the function is activated, the appliance automatically adapts energy consumption according to the time selected, i. IMPORTANT: To operate properly, the function must be on during the night and day. The function remains on until deactivated (or it is deactivated in case of a power failure or appliance switch-off ). Note: The declared appliance energy consumption refers to operation with the Eco Night function deactivated. Freeze Control is an advanced technology that reduces temperature fluctuations in the whole freezer compartment to minimum, thanks to an innovative air system, totally independent from the fridge. Freeze burns are significantly reduced and food preserves its original quality and color. To activate the Freeze Control choose the function from the menu, set to >ON< and press OK button to confirm the selection. To deactivate this function repeat the same procedure setting to >OFF<. The function works properly in a defined range of temperature: between -22°C and -24°C. When the function is engaged and the current temperature in the freezer is set to the warmer set point than -22°C, the temperature is automatically set to -22°C to match the working range. [. . . ] Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect the electrical power supply. Periodically clean the appliance with a cloth and a solution of lukewarm water and neutral detergent specifically for refrigerator interiors. Clean the outside of the appliance and the door seal with a damp cloth and dry with a soft cloth. Condenser placed in the rear of the appliance should be cleaned regularly using a vacuum cleaner. [. . . ]