User manual WHIRLPOOL GSC25C6EYB WARRANTY INFORMATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL GSC25C6EYB. We hope that this WHIRLPOOL GSC25C6EYB user guide will be useful to you.


WHIRLPOOL GSC25C6EYB WARRANTY INFORMATION: Download the complete user guide (124 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL GSC25C6EYB ENERGY GUIDE (403 ko)
   WHIRLPOOL GSC25C6EYB DIMENSION GUIDE (87 ko)
   WHIRLPOOL GSC25C6EYB USE & CARE GUIDE (1587 ko)
   WHIRLPOOL GSC25C6EYB INSTALLATION GUIDE (408 ko)

Manual abstract: user guide WHIRLPOOL GSC25C6EYBWARRANTY INFORMATION

Detailed instructions for use are in the User's Guide.

[. . . ] This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C) If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes. Check with a qualified electrical installer if you are not sure the oven is properly grounded. This oven must be connected to a grounded metal, permanent wiring system. [. . . ] A copy of the above code standards can be obtained from: National Fire Protection Association One Batterymarch Park Quincy, MA 02269 CSA International 8501 East Pleasant Valley Road Cleveland, OH 44131-5575 9 cm) bottom of cutout to floor D. To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here. Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located at the bottom of the right-hand mounting rail. Connect directly to the circuit breaker box (or fused disconnect) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). Flexible conduit from the oven should be connected directly to the junction box. Aluminum/copper connection must conform with local codes and industry accepted wiring practices. Locate existing wiring to avoid drilling into or severing wiring during installation. Grasp the edges of the oven door with both hands and close the oven door until it will no longer close. Untwist white wire from green (or bare) ground wire coming from the oven. Connect the 2 white wires (F) together using a UL listed wire connector. Push against seal area of front frame to push oven completely into cabinet and center oven into cabinet cutout. On models with shipping feet, use a Phillips screwdriver to remove screws attaching the shipping feet. Push oven completely into cabinet and center oven into cabinet cutout. Securely fasten oven to cabinet using the # 8­14 x 1" screws (2 for single oven, 4 for double oven) provided. Use the 8-18 x ³/" screws, located in the screw bag assembly, to attach each trim piece to oven. Replace oven door by inserting ends of hinges into hinge slots in the oven frame. Display panel will light briefly, and "PF" should appear in the display. [. . . ] Display panel will light briefly, and "PF" should appear in the display. If display panel does not light, please reference the "Assistance or Service" section of the Use and Care Guide or contact the dealer from whom you purchased your oven. If there is an extra part, go back through the steps to see which step was skipped. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL GSC25C6EYB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL GSC25C6EYB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.