User manual WHIRLPOOL AWP 090 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWP 090. We hope that this WHIRLPOOL AWP 090 user guide will be useful to you.


WHIRLPOOL AWP 090 INSTRUCTION FOR USE: Download the complete user guide (314 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWP 090 INSTRUZIONI PER L'USO (321 ko)

Manual abstract: user guide WHIRLPOOL AWP 090INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] GB QUICK REFERENCE GUIDE BEFORE USING THE APPLIANCE FOR THE FIRST TIME: • • • IMPORTANT: MAKE SURE YOU HAVE READ THE INSTALLATION INSTRUCTIONS REMOVE THE TRANSIT BOLTS BEFORE USING THE MACHINE FOR THE FIRST TIME First wash cycle without laundry 1. Pour a little detergent (about 100 ml) into the detergent compartment . This will remove any water remaining in the machine from the manufacturer's test run. ROUTINE WASHES Open the tap(s). Sort the laundry according to fabric type and colour and load the machine. [. . . ] (See also Important Note 2). PROGRAMME 1200 Cotton Synthetic Delicates Wool Superdelicates/viscose Rinse + spin Intensive spin Gentle spin 1200 900* 900* 900* 0 1200 1200 900* Important Note 1. When “No Spin” ( ) is selected: • The “Wool” and “Delicates” programmes do not run a spin cycle. • The “Cotton” and “Synthetic” programmes run a reduced speed spin cycle between rinses to ensure effective rinsing. Each programme has a predetermined automatic maximum spin speed as follows: MAX. SPIN SPEED in rpm (depending on model) 1100 1100 900* 900* 900* 0 1100 1100 900* 1000 1000 900* 900* 900* 0 1000 1000 900* 900 900 900 900 900 0 900 900 900 800 800 800 800 800 0 800 800 800 600 600 600 600 600 0 600 600 600 * To protect the wash, the real spin speed is here reduced to 900 rpm. 27 SELECTING THE PROGRAMME AND SPECIAL OPTIONS / PROGRAMME START PRESS THE DESIRED SPECIAL OPTION BUTTON (Depending on model, see also the separate programme chart). Spin speed reduction button • For models without spin speed selector, press this button to reduce the predetermined automatic maximum spin speed. No spin cycle is run during the “Superdelicates” programme. Prewash button • Do not select together with “Quick Wash” (“Rapid”) or other short programmes. • The prewash cycle adds 15 minutes to the programme time. Rinse hold / Spin delay button • The laundry remains in the last rinse water without being spun, to avoid heavy creasing. Note: Do not fully close the door but leave it ajar to allow the drum to dry out. PROGRAMME RESELECTION 1. The indicator light will come on. 29 REMOVING THE FILTER / DRAINING RESIDUAL WATER WHEN TO REMOVE THE FILTER • • • Check and clean the filter at least 2 or 3 times a year. When the appliance does not drain or spin properly. Important: Before draining, make sure that the water has cooled. REMOVING THE FILTER 1. Switch off the appliance (press the “ON/OFF” button). Open the filter cover with the coloured insert from the detergent drawer. Slowly turn the filter anticlockwise until its handle is vertical without unscrewing it completely. Insert the filter and screw it in clockwise until it locks (until the grip is horizontal). Pour 1/2 litre of water into the detergent drawer to reactivate the Eco system. Some models have no filter, since they are fitted with a self-cleaning pump. Note: If the filter needs to be cleaned during a programme, reset the appliance by switching it off and then on again. DRAINING RESIDUAL WATER • Drain the residual water as described in the previous chapter (points 1 to 8). • To drain the residual water from the pump, bend the machine frontward and operate as per points 9 and 10 of the previous chapter. WHEN TO DRAIN RESIDUAL WATER • • When transporting (moving) the machine. [. . . ] Do not cut the flexible hose and do not immerse the plastic enclosure in water. If the hose is damaged, unplug the appliance from the mains immediately. If the hose is not long enough, replace it with a 3 m long “Water Stop” hose (available from After-Sales Service or a specialist dealer). This must be done only by a qualified electrician. • • • For Great Britain & Ireland only: • Water inlet: hot and cold fill. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWP 090




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWP 090 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.