User manual WHIRLPOOL AWOE 8761 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWOE 8761. We hope that this WHIRLPOOL AWOE 8761 user guide will be useful to you.


WHIRLPOOL AWOE 8761 INSTRUCTION FOR USE: Download the complete user guide (550 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWOE 8761 PRODUCT FICHE (53 ko)
   WHIRLPOOL AWOE 8761 PROGRAM CHART (624 ko)

Manual abstract: user guide WHIRLPOOL AWOE 8761INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] • If the appliance was exposed to the cold prior to delivery, keep it at room temperature for a few hours before operating. • Use only new hoses to connect the washing machine to the water supply. Used hoses must not be used and should be discarded. 5. Drain • Connect the drain hose to the siphon or hook it over the edge of a sink by means of the “U” bend supplied. • If the washing machine is connected to an integrated drainage system, ensure the latter is equipped with a vent to avoid simultaneous loading and draining of water (siphoning effect). 2. Remove the transport bolts • The washing machine is fitted with transport bolts to avoid any possible damage to the interior during transport. [. . . ] can damage your laundry as well as the appliance drum and tub. 3. Fasteners Close zips and fasten buttons or hooks; loose belts or ribbons should be tied together. DETERGENTS AND ADDITIVES Keep detergents and additives in a safe, dry place out of the reach of children!The choice of detergent depends on: • Type of fabric (cottons, easy care/synthetics, delicate items, wool). Note: Use only specific detergents for washing wool and garments made of microfibres (like sports or swimwear). Remarks: • Any whitish residues on dark fabrics are caused by insoluble compounds used in phosphate-free powder detergents. If this occurs, shake or brush out the fabric or use liquid detergents. • Use only detergents and additives specifically produced for domestic washing machines. • When using descaling agents, dyes or bleaches for the prewash (if available on your model), make sure that they are suitable for use in domestic washing machines. Descalers could contain products which could damage your washing machine. Do not machine wash fabrics that have been treated with solvents or flammable liquids. • Do not use liquid detergent for the main wash when having activated the “prewash” option (if available on your model). • Do not use liquid detergent when activating the “Start Delay” function. Dosage Follow the dosage recommendations on the detergent pack. “C”), periodically check the colour of the transparent coating. If the transparent hose coating turns into an intense red, this is an indication that the hose may have a leak and should be replaced. Contact our After-Sales Service team or specialist dealer to obtain a replacement hose. A Cleaning the mesh filter in the water supply hose(s) 1. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Turn on the tap and ensure that the connections are completely water-tight. B Safety valve inspection window C GB 9 TROUBLESHOOTING GUIDE Your washing machine is equipped with various automatic safety functions. These enable faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be removed within a few minutes. Problem Appliance does not start, no indicator lamps are on Causes, Solutions, Tips • Plug is not properly inserted in socket. • Socket or fuse does not function correctly (use a table lamp or similar appliance to test it). • the “On/Off” button has not been pressed (if available on your model). Appliance does not start • Door is not properly closed (see also “Child Safety”). [. . . ] • Filter or pump is blocked (see chapter “Draining Residual Water/ Removing The Filter”; make sure the water has cooled before draining the appliance). After problem has been removed, push the “Reset” button for at least 3 seconds; afterwards restart the desired programme. If the fault occurs again, contact our After-Sales-Service (see next chapter). Red indication lights up “Water tap closed” --- “Clean pump” --- GB 11 Red indication lights up Indication on display Description Causes Solutions “Electrical module fault” Push the “Reset” button for at least 3 seconds. “Electrical module fault” Make sure that the water tap is open. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWOE 8761




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWOE 8761 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.