User manual VIVITAR VIVICAM 5385

[. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] To cancel the self-timer at any time, press the shutter or button, switch the mode dial to another mode or press to disrupt the sequence. After one shot is taken, the self-timer mode is turned off. If you wish to take another image using the self-timer, repeat these steps. EN-27 Adjusting the Exposure (EV Compensation) You can manually adjust the exposure determined by the ViviCam 5385. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (different between light and dark) between the subject and the background is extremely large. The EV compensation value can be set in the range from ­2. 0EV to +2. 0EV. Press Use to select [EXPOSURE], then use or to set the range of EV compensation value from ­2. 0EV to +2. 0EV. To exit from the menu, press the button. PICTURE FUNCTION AE/AWB EXPOSURE W. BALANCE ISO 100 1/3 +0. 7 EN-28 Setting White Balance This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions. Use or to select the desired setting, then press the button to confirm. To exit from the menu, press the button. PICTURE FUNCTION AE/AWB +0. 7 EXPOSURE W. BALANCE ISO 100 2/3 W. BALANCE AUTO DAYLIGHT CLOUDY SUNSET 1/6 W. BALANCE TUNGSTEN FLUORESCENT 5/6 EN-29 USING THE MODE DIAL Auto Mode A (Auto) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. Rotate the mode dial to A mode and turn your ViviCam 5385 on by pressing the button. When you press the shutter button down half way, the camera's Auto Focus feature automatically focuses the image and exposure. Press the shutter button the rest of the way down to capture the image. A 3M 8 SD X1 1. 5x 2004. 09. 17 Program Mode In P (Program) mode, the ViviCam 5385 automatically sets the shutter speed and aperture for taking still images. You can adjust other functions, such as flash mode or continuous shooting mode. Rotate the mode dial to P mode and turn your ViviCam 5385 on by pressing the button. Press the shutter button to capture the image. P 3M 8 SD X1 1. 5x 2004. 09. 17 EN-30 Portrait Mode Select this mode to make people stand out with the background out-of-focus. Press the shutter button to capture the image. 3M 8 SD X1 1. 5x 2004. 09. 17 Landscape Mode This mode allows you to take photographs of distant scenery or landscapes. Press the shutter button to capture the image. 3M 8 SD X1 1. 5x 2004. 09. 17 EN-31 Sports Mode This mode allows you to shoot fast moving objects. Press the shutter button to capture the image. 3M 8 SD X1 1. 5x 2004. 09. 17 Night Mode This mode allows you to take photographs of people against a dusk or night-time background. Rotate the mode dial to mode and turn your ViviCam 5385 on by pressing the button. Press the shutter button to capture the image. 3M 8 SD X1 1. 5x 2004. 09. 17 EN-32 ADVANCED SHOOTING Burst This mode is used for continuous shooting. Pictures are taken continuously while the shutter release button is pressed. Rotate the mode dial to P , , , or and turn your ViviCam 5385 on by pressing the button. To exit from the menu, press the The indicator is displayed on the monitor screen. [. . . ] Use or to select the desired option item, then press the To exit from the setup menu, rotate the mode dial to other desired mode again. BASIC settings Item BEEPER Functional Description This sets whether or not to mute the startup sound, and the ViviCam 5385 sound each time you press the camera button. * LOUDER / SOFT / OFF If no operation is performed for a specific period of time, the power to the ViviCam 5385 is automatically turned off. / OFF POWER OFF DIGITAL ZOOM This sets whether or not to use digital zoom at the time of photography. * ON / OFF EN-61 Item SET TO DEFAULT Functional Description Returns all basic settings to the ViviCam 5385's default settings. [. . . ]