User manual UFREE SCOOTER SCOOTER ELETTRICO FS-E12

[. . . ] Before using the scooter, please read all the instructions consist inside the manual. In order for us to better serve you, let us know how our product works. THANK YOU FOR SELECTING OUR ELECTRIC SCOOOTER, WE HOPE YOUR WILL ENJOY THE EXCITING RIDING. UFREE SCOOTER www. scooter-manufacturer. com KNOWING YOUR SCOOTER The scooter will be as the following: Speed throttle control Brake handle Seat saddle Battery indicator Front light Folding accessories Seat collar clamp Brake light Front wheel Back wheel Fuse socket Plastic cover Charger socket Stand Rear brake Fig1. Scooter with full assembly showing name for each part Also, you should have the following with your scooter Fig2. Also, for your convenience, the following access or are provided. 1 UFREE SCOOTER www. scooter-manufacturer. com Fig 3 tools set Here is the specification for your scooter: Weight (including Battery): 30kgs Load Capacity: 85kg Brake system: hand front, rear brake Full Charge Mileage: 20km Max Speed: 20km/hr System Voltage: 24V Motor Power: 300W Charge Voltage: 100-230V Battery: 12V 12AH*2pcs Charge time: 4-6 hours Tyres: Rubber pneumatic tyres 2 UFREE SCOOTER www. scooter-manufacturer. com ASSEMBLY INSTRUCTION 1. [. . . ] For people weight more than 200 lbs should not use this Electric Scooter. Do read the whole manual and follow all the safety and maintenance recommendations made there. Do avoid use the scooter on gravel, sand, grass, mud, water and rough surface area. Don't use this electric scooter in the rain to prevent short circuit. Don't place the battery near the fire or heat to prevent exploded. Don't allow the child under 14 years of age to handle the scooter without the supervision of an adult 5. Don't riding the scooter after drinking alcohol. 7 UFREE SCOOTER www. scooter-manufacturer. com OPERATING THE SCOOTER After assembly and charging your scooter, your scooter is ready to ride. Test all the electric functions before riding on the road, including direction light, front light, horn and brake light. It is suggested user should have a short test for the scooter before riding on the road. To start the running, turn the accelerator anti clockwise to start movement and increase the speed. The actual speed is depended on the user weight, the road, tyre pressure and other factors. To stop the scooter, you can release the accelerator by turning clockwise. When your pull the brake, it will automatically cut off the power supply to the motor and slow down. CAUSION: For safety reason, your brake system won't stop the scooter once it is applied immediately. After riding the scooter, you must turn the key power to "OFF" status, to avoid unexpected accident and save energy. Also, do charge the battery after each usage. 8 UFREE SCOOTER www. scooter-manufacturer. com TROUBLESHOOTING GUID Problem Power does not on Possible causes 1. Connect the charger with the scooter first, and then connect to the AC power supply. Please contact with dealer for a new charger. 8 UFREE SCOOTER www. scooter-manufacturer. com Note 1: drive chain adjustment Periodic adjustment of the drive chain will be necessary to maintain proper tension. If the chain is too loose, it will make a "popping" noise while accelerating, indicating the need for immediate adjustments. Before Adjusting the chain, please make sure to disconnect the battery power to prevent accident starts or shocks. [. . . ] To validate warranty please complete and return form below within 14 days of purchase to unlimited Tech, 3677 san Gabriel River Parkway Pico Rivera CA 90660. Tel: 562-695-4229 Name: Address: Supplier Name & Address/Stamp Post Code: Tel. No. : Date of Purchase Product code/ Description: Serial Number: 11 UFREE SCOOTER www. scooter-manufacturer. com CERTIFICATE OF WARRANTY (only valid in conjunction with sales receipt) Name: Supplier Name & Address/Stamp Address: Please include proof of purchase Post Code: Tel. No. : Date of Purchase Product code/ Description: Serial Number: Detailed Description of Defect: 12 UFREE SCOOTER www. scooter-manufacturer. com In the event of a claim the unit should be returned, together with warranty certificate and sales receipt, to the place of purchase or the address specified by your supplier for inspection, repair or replacement. [. . . ]