User manual TYAN S8225

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TYAN S8225. We hope that this TYAN S8225 user guide will be useful to you.


TYAN S8225 : Download the complete user guide (6378 Ko)

You may also download the following manuals related to this product:

   TYAN S8225 BROCHURE (989 ko)

Manual abstract: user guide TYAN S8225

Detailed instructions for use are in the User's Guide.

[. . . ] S8225 Version 1. 00 Copyright Copyright © MiTAC Computer Corporation, 2010. No part of this manual may be reproduced or translated without prior written consent from MiTAC Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN® is a trademark of MiTAC Computer Corporation ® ® AMD , Opteron , and combinations thereof are trademarks of AMD Corporation. AMI®, AMIBIOS® and combinations thereof are trademarks of AMI Technologies. [. . . ] [Auto] / [Disabled] Active State Power Management Enable/disable PCI Express L0s AND L1 link power states. [Disabled] / [Enabled] Extended Synch If enabled, allows generation of Extended Synchronization patterns. [Auto] / [Disabled] 53 http://www. TYAN. com 3. 7. 7- Remote Access Configuration Sub-Menu Remote Access Enables remote access to system through serial port. [Disabled] / [Enabled] The following BIOS items are available only when Remote Access is set to [Enabled]. Serial Port Number Select Serial Port for cosole redirection. [COM1] / [COM2] / [COM3] (virtual for BMC) Serial Port Mode Select Serial Port settings. Flow Control Select Flow Control for console redirection. [None] / [Hardware] / [Software] Redirection After BIOS POST Disabled: Turns off the redirection after POST Boot Loader. Boot Loader: Redirection is active during POST and during Boot Loader. (Some Oss may not work if set to Always) [Always] / [Disabled] / [Boot Loader] 54 http://www. TYAN. com Terminal Type Select the target terminal type. [ANSI] / [VT100] / [VT-UTF8] VT-UTF8 Combo Key Support Enable VT-UFT8 Combination Key Support for ANSI/VT100 terminals. [Enabled] / [Disabled] Sredir Memory Display Delay Gives the delay in seconds to display memory information. [No Delay] / [Delay 1 Sec] / [Delay 2 Sec] / [Delay 4 Sec] 55 http://www. TYAN. com 3. 7. 8 - USB Configuration Sub- Menu Legacy USB Support Enables support for legacy USB. [Enabled] / [Disabled] / [Auto] USB 2. 0 Controller Mode Configure the USB 2. 0 controller in Hi Speed (480 Mbps) or Full Speed (12Mbps). [Hi Speed] / [Full Speed] BIOS EHCI Hand-OFF This is a work around for OSes without EHCI hand-off support. [Enabled] / [Disabled] Legacy USB1. 1 HC Support Enables support for legacy USB. [Enabled] / [Disabled] 56 http://www. TYAN. com 3. 7. 9 - PCI/PnP Menu Clear NVRAM Clear NVRAM during system Boot. [No] / [Yes] Plug & Play O/S No: lets the BIOS configure all the devices in the system. Yes: lets the operating system configure Plug and Play (PnP) devices not required for boot if your system has a Plug and Play operating system. [No] / [Yes] PCI Latency Timer This setting controls how many PCI clocks each PCI device can hold the bus before another PCI device takes over. When set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. Values in units of PCI clocks for PCI device latency timer register [64] / [32] / [96] / [128] / [160] / [192] / [224] / [248] Allocate IRQ to PCI VGA Yes: assigns IRQ to PCI VGA card if card requests IRQ. [Yes] / [No] Palette Snooping This is the default setting and should not be changed unless the VGA card manufacturer requires Palette Snooping to be Enabled. Enabled: informs the PCI devices that an ISA graphics device is installed in the system so the card will function correctly. [. . . ] This shifts the processor over and down, guiding it into the board and locking it into place. 81 http://www. TYAN. com Technical Support If a problem arises with your system, you should first turn to your dealer for direct support. Your system has most likely been configured or designed by them and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, take the system to them directly to have it serviced instead of attempting to do so yourself (which can have expensive consequences). If these options are not available for you then TYAN® Computer Corporation can help. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TYAN S8225




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TYAN S8225 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.