User manual TRIMBLE VARIABLE RATE APPLICATION 4.00 GETTING STARTED FOR EZ-GUIDE 500 LIGHTBAR GUIDANCE SYSTEM REV A

[. . . ] Version 4. 00 Revision A March 2009 PN 72556-80-ENG Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Legal Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Related Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Technical Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Variable Rate Application Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Firmware Upgrade Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Confirm VRA Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Prescriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction to Prescriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Importing Prescriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Loading a Prescription. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 EZ-Boom 2010 System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Connecting the EZ-Boom 2010 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 EZ-Boom Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 EZ-Boom Flow Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the EZ-Boom 2010 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Hardi 5500 Variable Rate Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Connecting a Hardi 5500 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Hardi Controller Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 On-Screen Features with a Hardi Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Using the Hardi Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Raven Variable Rate Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Connecting a Raven Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Operational Warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Raven Controller Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 On-Screen Features with a Raven Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 . Using the Raven Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Rawson Variable Rate Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Connecting a Rawson Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Rawson Controller Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 On-Screen Features with a Rawson Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Using the Rawson Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 i Introduction Legal Notices (c) 2009, Trimble Navigation Limited. Trimble, AgGPS, EZ-Guide, and EZ-Steer are trademarks of Trimble Navigation Limited, registered in the United States and in other countries. Autopilot, Autoseed, FreeForm, OnPath, and SiteNet are trademarks of Trimble Navigation Limited. [. . . ] To configure the number of boom sections and section widths, go to the Application Control / Boom Setup menu. Hardi controller setup On the Hardi 5500 controller, do the following: 1. For more information on configuring or calibrating the Hardi 5500 controller, refer to the Hardi instruction manual. Verify Hardi controller communication To verify that the EZ-Guide 500 lightbar and the Hardi 5500 variable rate controller are communicating correctly, view the VR Controller Status screen. Note: If Status displays Not Connected, verify that the EZ-Guide 500 to Hardi controller cable is securely connected to the EZ-Guide 500 lightbar and the Hardi 5500 controller. If the cable is secure, verify that the EZ-Guide 500 lightbar and Hardi 5500 controller are configured correctly, as detailed above. On-Screen Features with a Hardi Controller When the Hardi 5500 variable rate controller is connected to the lightbar, the following features appear or become available: 18 ITEM 1 DESCRIPTION The actual current rate Note: Since the Hardi controller does not report the actual applied rate to the EZ-Guide 500 lightbar, this item will always appear as N/A. Auto/manual switching indicator shows which switching mode the controller is in. * When the controller is in manual switching mode, the indicator is gray. * When the controller is in automatic switching mode, the indicator is in color. Fence nozzle indicator If a fence nozzle is enabled, an indicator appears. Fence nozzle status is represented with the same colors as the boom sections. Note: The EZ-Guide 500 lightbar cannot automatically turn fence nozzles on or off. Boom section status indicators change color to show the current state of each boom section: * Green - The boom section is enabled and spraying. The wheel spins when the Hardi master switch is on and the booms are on. The intended target rate Note: If a prescription is loaded, P is displayed to indicate that the prescription rate is being used, rather than the Target 1 rate ( T ) Application Control menu quick access icon Information tab listing sprayer-specific information 2 3 4 5 6 7 8 Quick access icon The icon enables you to access the Application Control menu more quickly. 19 Alternatively, set the User Mode to Advanced and then select Configuration / Application Control. Using the Hardi Controller When using a Hardi variable rate controller with the EZ-Guide 500 lightbar, note the following: Boom setup If the boom setup differs between the EZ-Guide 500 lightbar and the Hardi controller, a warning message appears on the lightbar. You must configure the EZ-Guide 500 lightbar to match the Hardi controller. To do this, select Configuration / Application Control / Boom Setup. Rate control The EZ-Guide 500 lightbar has two options for rate contol: ITEM DESRIPTION Application rates are sent from a prescription loaded in the EZ-Guide 500 lightbar or the target rate On manually configured on the lightbar. The EZ-Guide 500 lightbar does not send target rates Off to the controller. (This is the default setting) To configure the Rate Control option, select Configuration / Application Control / Rate Control . 20 To manually enter a rate to send to the controller, select Configuration / Application Control / Target Rate . Note: When sending a target rate to the Hardi 5500 controller that is higher than 99. 9, the value will be rounded to the nearest whole number. Automatic boom switching The EZ-Guide 500 lightbar will do automatic boom switching for the Hardi variable rate controller. Use the Swath Control menu to configure the following settings: ITEM DESCRIPTION Boom Control Enable or disable automated boom switching contol. Controls the amount of overlap allowed before a boom section is switched off. [. . . ] The wheel spins when the Rawson master switch is on and the unit is reporting it is running. 4 5 36 The intended target rate Note: If a prescription is loaded, P is displayed to indicate that the prescription rate is being used, rather than the Target 1 rate ( T ) 6 7 Quick access icon The icon enables you to access the most common variable rate controller settings more quickly. When you Application Control menu quick access icon Information tab listing sprayer-specific information select the icon, the following screen appears: Alternatively, set the User Mode to Advanced and then select Configuration / Application Control. Using the Rawson Controller When using a Rawson variable rate controller with the EZ-Guide 500 lightbar, note the following: Default rate and step size The values entered for Default Rate and Step Size on the EZ-Guide 500 lightbar must match the values entered on the Rawson controller when they are first plugged in. Target rate 37 To manually enter a rate to send to the controller, select Configuration / Application Control / Target Rate . Note: The Target Rate screen will give the same set of steps as available using the control knob on the Raven controller. Alternatively, load a prescription so the EZ-Guide 500 lightbar automatically sends target rates to the Rawson controller. Note: When using a prescription with the Rawson controller, the target rates in the prescription must match the step sizes in the Rawson controller. [. . . ]