User manual TP-LINK M5350

[. . . ] M5350 3G Mobile Wi-Fi REV 1. 1. 0 1910100018 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO. , LTD. http://www. tp-link. com is a registered trademark of TP-LINK TECHNOLOGIES CO. , LTD. Other brands and product names are trademarks or FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. [. . . ] Phone Number: Shows the cellphone number that this message was planned to be sent to. Content: Click to unfold and read the detailed content of the message(s), or for further edition and delivery (as shown in Figure 4-8). Select: Select the message(s) for deletion. Click Select All to select all of the messages. Click Delete to delete the message(s) selected. Figure 4-8 Edit Message (Drafts) -16- M5350 3G Mobile Wi-Fi User Guide 4. 3. 5 SMS Settings On this page, you can do the following settings: Figure 4-9 Settings   Message Center: Disabled by default. If you want to manually set the Message Center Number, please select Enable. Message Center Number: When the Message Center is enabled, you can enter the Message Center Number of the local ISP. If you enter a wrong number, the SMS would be affected and not properly used.   Save the Delivered Messages: Enable it to automatically save the delivered messages in the Outbox. Auto Replace Old Messages: If enabled, it will automatically delete the oldest message and save the new one when the Outbox or Drafts box is full. If disabled, you need to manually delete the old messages to save the new ones when the Outbox or Drafts box is full. Click Save to make your settings take effect. -17- M5350 3G Mobile Wi-Fi User Guide 4. 4 Advanced Figure 4-10 Advanced Menu There are four submenus under the Advanced tab (as shown in Figure 4-10): Dial-up, Wireless, DHCP Server and System Tools. Click any of them, and you will be able to configure the corresponding functions. 4. 4. 1 Dial-up Figure 4-11 Dial-up Menu -18- M5350 4. 4. 1. 1. Dial-up 3G Mobile Wi-Fi User Guide Dial-up Settings page allows you to do the following configurations. Figure 4-12 Dial-up Settings    Profile List: A list of profile(s). Network Status: Shows whether the Internet is connected or disconnected at present. Dial-up type: The device provides two types of dial-up – Auto and Manual.  Auto: The device will automatically establish connection once it‟s started. During the process, if your Internet connection is terminated due to some exterior reasons, the device would automatically attempt connection until it‟s successful. This option is suggested, if you have the network service paid by month.  Manual: When you start the device and your computer, or when the connection is terminated during the process, you need to manually dial up for connection in here. When you select Manual as your dial-up type, you need to specify a MAX Idle Time (5 minutes by default), namely a period of inactivity, after which the device will disconnect your Internet connection, and not be able to re-establish your connection automatically as soon as you attempt to access the Internet again. If you have the network service paid by hour, this option is suggested. Click Save to save the above settings and have them take effect. Profile Management You can manage your profile on this page. -19- M5350 3G Mobile Wi-Fi User Guide Figure 4-13 Profile Management  Profile List: A list of profile(s). Select the profile of your SIM card currently inserted in the device, and then you can view the related information of it. If you find any parameters wrong, you can click Create to create a new profile with the right settings (as shown in Figure 4-14).   Profile Name: Displays the name of the profile you‟ve selected. [. . . ] 1) 2) Connect one end of the USB cable to the micro USB port of M5350 and the other end to the USB port of your PC. If there appears the Found New Hardware Wizard window, please click Cancel to ignore it. -34- M5350 3G Mobile Wi-Fi User Guide Figure-A-0-1 3) Double click Computer icon on your desktop. The inserted micro SD card is displayed as removable disk in file explorer (Here we take Removable Disk (F:) for example). Double click to access the micro SD card just as access a hard disk. Figure-A-0-2 -35- M5350 3G Mobile Wi-Fi User Guide Appendix B: Configuring the PC In this section, we‟ll introduce how to install and configure the TCP/IP correctly in Windows XP. [. . . ]