User manual TISSOT SILEN-T

[. . . ] By virtue of its touch-sensitive technology and the vibrating unit fitted to the movement, you can read and set the time and the alarm by pressing the touch-sensitive crystal and the bezel. This function enables every individual wearer to tell the time very discreetly, and offers particular benefits to visually impaired people for whom this watch represents a long awaited step forward. ® Characteristics Setting the time To set the time, proceed as follows : ­ Pull out button (3). on the appropriate one of the relief figures arranged around bezel (4). [. . . ] ­ After 10 seconds, or after pressing the button (3), the hands will once again display the correct time. Setting the alarm ­ Activate the touch-sensitive crystal (5) by applying downward pressure on the button (3) for more than 4 seconds until a short vibration is issued. Activation and deactivation of the alarm ­ Activate the alarm by pressing the button (3) briefly for less than 2 seconds. After 2 seconds, 2 vibrations indicate that the alarm has been activated. After holding your finger against the touch-sensitive crystal for more than 5 seconds, the alarm test is activated. ­ To deactivate the alarm, press button (3) and hold it down for less than 2 seconds. After 2 seconds, a single vibration informs you that the alarm has been deactivated. Alarm signal and stop functions ­ Alarm signal function : a series of 7 intermittent vibrations, repeated after 1 minute. Instead, you need to activate it each time you wish to use it. use Reading the time ­ Activate the touch-sensitive crystal by pressing the button briefly (for less than 2 seconds) (3). ­ With your finger, run clockwise across the touch-sensitive crystal (5) at the same time as the internal edge of the bezel (4) which features the reference points in relief. ­ Sense the vibrations, with one continuous vibration for one hour, and one or more intermittent vibrations for the minutes and tell the time by touching the indicator in relief which corresponds to the bezel (4). Examples : ­ 11 hours, 7 minutes = 1 continuous vibration at 11 o'clock and 2 short intermittent vibrations at 1 o'clock. ­ 5 hours 40 minutes = 1 continuous vibration at 5 o'clock and 1 succession of short vibrations at 8 o'clock. at 04:22, you receive one continuous vibration at 4 o'clock interposed by 2 short vibrations. ch 2/3 137_EN / 08. 06 Silen-T * Synchronization This operation can only be performed visually, and it enables you to synchronize the hands to the vibration signals. ­ By holding your finger down on the button (3), sense a second vibration after 10 seconds. ­ Position the hour hand at 12 o'clock by placing a finger on the crystal (5) at 9 or 10 o'clock to move the hour hand anticlockwise or at 2 or 3 o'clock to move the same hand in a clockwise direction. ­ Position the minute hand at 12 o'clock by placing a finger on the crystal (5) at 7 or 8 o'clock to move the minute hand anticlockwise or at 4 or 5 o'clock to move the same hand in a clockwise direction. [. . . ] The 2 batteries need to be replaced simultaneously without delay by either a retailer or an official TISSOT ® agent. Collection and treatment of end of life quartz watches* This symbol indicates that this product should not be disposed with household waste. By following this procedure you will contribute to the protection of the environment and human health. [. . . ]