User manual TISSOT NAVIGATOR 3000

[. . . ] , a setting can be Decrementing · When the digital display flashes, it is possible either to make a correction with 3 ( ) or 4 ( ), or to confirm the setting by pressing the crown (short press < 1 s). If no operation is performed during 10 seconds, the last setting is not validated and the touch screen is deactivated. · After validating a setting, the watch returns automatically to the time mode and the digital display indicates the last setting made. · When the crown is pressed, the watch emits a high-pitched beep for confirmation, while a low-pitched beep indicates an inappropriate action*. Lighting Activation/Adjustment To activate lighting of the digital display, turn the crown to the left or right. Once the lighting has been activated, turn the crown to the right to increase the intensity, or to the left to reduce it. [. . . ] After the final confirmation, you can set the time if necessary (see above). 5" When the "ECO BAT" function is displayed, press the crown for 5", and the hands should be positioned on midday. Press tactile zone to move the minute hand forward; Press tactile zone to move the hour hand forward. Confirm by pressing the crown. Time zone mode Through its T-World function, your watch can display the time in four other time zones, parameterizable. The standard settings give the local time in New York, Rio de Janeiro, Thailand and Sydney, but they can be changed by selecting one of the 150 other pre-memorized zones. You can also select the reference time with the SWAP function, display the absolute time or the time difference with the ABS function, and even, in Expert mode, alter the date for changing summer time and winter time (DST or daylight saving time function). Touch the screen to select the desired region or to navigate through to the "SET" function. To access the settings, select the "SET" function and then press the crown. 2" 2" Absolute time (GMT) or Time difference Touch the screen several times until you reach the setting you wish to change, then press the crown to confirm your choice. ww w. ch 4/7 140_EN / 08. 06 Navigator 3000 * Selecting another time zone By means of tactile zone or , select from the four pre-memorized time zones the one you want to change. Confirm your choice by pressing the crown. Change of reference time By means of tactile zone or , select from the four pre-memorized time zones the one you want to use as reference time. This time becomes the reference time. First select a destination continent. The "SWAP" function changes the local time with the time of one of your time zones. As a result, your local time is now in the "T-WORLD" function and the time of your time zone can be found in the "TIME" function. The alarms are synchronized with the analog display. ______ Then select a country. Confirm your choice by pressing the crown. Changing the time display Absolute time - Time difference Select "T ABS" to display the absolute time or "T DIF" to display the time difference. Confirm your choice by pressing the crown. _____ Then select a city (if it is available). Confirm your choice by pressing the crown; you then exit setting mode. 5" DST setting (daylight saving time) See Expert mode Exit setting mode. Expert mode DST setting (daylight saving time) By means of tactile zone or , select the "DST ON" function to change the date, or "DST OFF" to eliminate the daylight saving time change. Select the day and month of the start of daylight saving time for the current year by means of tactile zone or . Select the day and month of the end of daylight saving time for the current year by means of tactile zone or . Press the crown to confirm the setting. 5" From the "T ZONE" function, press the crown for 5" to access the "DST" function. By means of tactile zone or , select from the four time zones the one you want to change. Confirm to access the settings. Note: If you remove the country/city from the "T-world" function, manual setting of the daylight saving time will also be eliminated. w w w. c h 5/7 140_EN / 08. 06 Navigator 3000 * Alarm mode Your watch has two different day alarms, which can be set separately over 24 hours and/or over 7 days (see Expert mode). [. . . ] Touch the screen to select the desired display or to navigate through to the "SET" function. To access the settings, select the "SET" function and press the crown. Timer mode Your watch has a timer function. Once the programmed period of time has elapsed, an audible alarm is triggered. Touch the screen to select the "TIMER" mode or the "SET" function. [. . . ]