User manual TENDA W268R

[. . . ] 11N Wireless Broadband Router 1 11N Wireless Broadband Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co. , Ltd. All the products and product names or mentioned registered including herein are of the their and trademarks as trademarks its respective holders. Copyright of the whole product integration, accessories software, belongs to Shenzhen Tenda Technology Co. , Ltd. Without the permission of Shenzhen Tenda Technology Co. , Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. [. . . ] Step 6: select the communication protocol used by your internal host: TCP, UDP, ICMP. The following table has listed the well-known application and service port: Server WEB Server FTP Server Telnet NetMeeting Protocol TCP TCP TCP TCP Service Port 80 21 23 15031720 File Send:6891-6900(TCP) MSN Messenger TCP/UDP Voice:18636901(TCP) Voice:18635190(UDP) PPTP VPN Iphone5. 0 SMTP POP3 TCP TCP TCP TCP 1723 22555 25 110 69 Wireless-N Broadband Router Wireless-N Broadband Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co. , Ltd. All the products and product names or mentioned registered including herein are of the their and trademarks as trademarks its respective holders. Copyright of the whole product integration, accessories software, belongs to Shenzhen Tenda Technology Co. , Ltd. Without the permission of Shenzhen Tenda Technology Co. , Ltd, any individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. All the photos and product specifications mentioned in this manual are for references only. And if there are changes, Tenda is not responsible for informing in advance. If you want to know more about our product information, please visit our website at www. tenda. cn. 11N Wireless Broadband Router Contents Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1. 2 1. 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 2 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4. 1 Setup Wizard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5. 2 WAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 5. 4 DNS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Chapter 6: Wireless Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 6. 1 Basic Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 11N Wireless Broadband Router 6. 2 Wireless Security Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 6. 4 WPS Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6. 5 WDS Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Chapter 7: DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 7. 1 DHCP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Chapter 8 Virtual Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 8. 2 DMZ Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If your problems are not in the list, please log into our website www. tenda. cn or send an E-mail to support@tenda. cn, and we will reply you in the first time. 1 Can not login to the Web interface of the Router after you enter the IP address in the address field Step 1: check the Router if it works well. Once the device is powered on for a few seconds, the SYS indicator on the panel will be turned on. Step 2: check the network cables if it is good and the corresponding indicator is "Always ON". [. . . ]