User manual TENDA 3G150B

[. . . ] 3G150B 150Mbps Portable 3G Wireless Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co. , Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co. , Ltd. Without prior expressed written permission from Shenzhen Tenda Technology Co. , Ltd, any individual or party is not allowed to copy, plagiarize, reproduce, or translate it into other languages. [. . . ] 11b mode：Select it if you have only Wireless-B clients in your wireless network. 11g mode：Select it if you have only Wireless-G clients in your wireless network. 11b/g mixed mode: Select it if you have only Wireless-B and Wireless-G clients in your wireless network. 11b/g/n mixed mode: Select it if you have Wireless-B, Wireless-G and Wireless-N clients in your wireless network. SSID：SSID (Service Set Identifier) is the unique name of a wireless network. With this option disabled, no wireless clients will be able to see your wireless network when they perform a scan to see what’s available. If they want to connect to your router, they will have to first know your SSID and then manually enter it on their devices. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. From the drop-down list ， you can select a most effective channel, which ranges from 1 to 13. You can also select “Auto 39 3G150B 150Mbps Portable 3G Wireless Router Select” to let system detect and choose one that best fits your network. Extensional Channel： Indicates the network frequency range for 11n mode. Channel Bandwidth: Select a proper channel bandwidth to enhance wireless performance. When there are 11b/g and 11n wireless clients, please select the 802. 11n mode of 20/40M frequency band; when there are only non-11n wireless clients, select 20M frequency band mode; when the wireless network mode is 11n mode, please select 20/40 frequency band to boost its throughput. 6. 2 Wireless Security This section allows you to configure wireless encryption. The device supports WPA-Personal, WPA2-Personal and mixed WPA/WPA2-Personal. Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) are two security protocols and security certification programs developed to secure wireless computer networks. It is to strongly encrypt suggested your that you use AES to of WPA-personal wireless network block unauthorized and undesired share of Internet connection. The following introduces two commonest encryption methods (Wireless network adapters need the required security key to connect to your device, once you encrypt it. 40 3G150B 150Mbps Portable 3G Wireless Router 6. 2. 1 WPA-PSK The WPA protocol implements the majority of the IEEE 802. 11i standard. It enhances data encryption through the Temporal Key Integrity Protocol (TKIP) which is a 128-bit per-packet key, meaning that it dynamically generates a new key for each packet. WPA also includes a message integrity check feature to prevent data packets from being hampered with. Only authorized network users can access the wireless network. Security Mode: Select a proper mode that is also supported by your wireless clients. Cipher Type: Select either AES (advanced encryption standard) or TKIP (temporary key integrity protocol) type. [. . . ] To do so, follows the steps below: Step 1: Create your internal server, make sure the LAN users can access these servers and you need to know related service ports, for example, Web server’s port is 80; FTP is 21; SMTP is 25 and POP3 is 110. Step 2: Click “Virtual Server” and select “Port Forwarding” on the Router’s web interface. 80 Please replace the default MTU value with the recommended value of 1450 or 1400 in the “WAN Setting” 3G150B 150Mbps Portable 3G Wireless Router Step 3: Input the external service port, for example, 80. Step 6: Select a communication protocol used by your internal host: TCP, UDP or ICMP. [. . . ]