User manual TEKTRONIX P6245 DATASHEET

[. . . ] Active Probe for SMDs P6245 · P6243 Data Sheet P6243 1 GHz Bandwidth (probe only) 1 pF Input Capacitance 1 M Input Resistance Direct Access to SMDs as Small as 0. 5 mm Pitch Measures CMOS, BiCMOS, ECL, GaAs, and TTL Logic Low-mass Probe Head/Cable No Additional Power Supplies or Cables Are Required with TEKPROBETM BNC Interface Applications High-speed Digital Systems Design P6243 Component Design/Characterization Manufacturing Engineering and Test Educational Research Features & Benefits P6245 1. 5 GHz Bandwidth (Typical, Probe Only) 1 pF Input Capacitance 1 M Input Resistance Direct Access to SMDs as Small as 0. 5 mm Pitch Measures CMOS, BiCMOS, ECL, GaAs, and TTL Logic Data Sheet P6245 and P6243 Active Probes for TEKPROBE BNC Interfaces P6245 The P6245 Active FET probe achieves high-speed signal acquisition by solving three traditional problems: Lower DUT loading (1 pF/1 M probe loading) Direct and easy access to SMDs Access DUT signals and scope bandwidth for TDS600/700/3000/5000/6000/7000*1 and CSA7000 scopes up to 1 GHz bandwidths The P6245 and P6243 Active probes provide the electrical and mechanical performance required for today's digital systems designs. [. . . ] Ground Lead Y Lead Adapters SMT KlipChipTM Adapter Color Coding Clips, 2 each 5 colors Right Angle Square Pin Adapter 100 Mil Square Pin Adapter 10 each 2 each 2 2 2 4 each each each each 10 each 2 each 1 1 1 2 each each each each 131-5638-xx (Pkg. of 10) 196-3436-xx 196-3437-xx 196-3463-xx 206-0364-xx 016-1315-xx 214-4227-xx 131-5777-xx 1 each 2 each 2 each 1 each 1 each 1 each Service Opt. C3 ­ Calibration Service 3 Years C5 ­ Calibration Service 5 Years D1 ­ Calibration Data Report D3 ­ Calibration Data Report 3 Years (with Opt. C5) R3 ­ Repair Service 3 Years R5 ­ Repair Service 5 Years P6243 The P6243 Active FET probe is the high-performance probing solution for 500 MHz oscilloscopes. The P6243 has a probe only bandwidth of 1 GHz and will provide a 500 MHz system bandwidth when used with Tektronix' full line of 500 MHz oscilloscopes. In addition, the P6243 is powered by the TEKPROBE BNC interface, eliminating the need for additional power supplies and cables when used with TEKPROBE BNC oscilloscopes. The P6243 offers superior signal acquisition on surface mount devices compared to the much higher capacitive loading of passive probes. The P6243 has 1 pF capacitive loading which allows it to measure high-speed signals without affecting the signal or device under test. [. . . ] All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. [. . . ]