User manual TANGENT TRIO

[. . . ] Power cords: Wiring must be organized to prevent people from stepping on the cables and to avoid pinching by objects placed on or beside them. Take special care around sockets and plug boxes and where the power cords leave the unit. Overloading: Make sure that wall sockets, extension cords and plug boxes are not overloaded as this may lead to fire or electrical shock. Lightning Unplug the unit for additional protection during thunder or when the unit is not used for prolonged periods. [. . . ] B) If liquid has been spilled on the unit or objects have fallen into the unit. D) If the unit does not work properly after adhering to the instructions in the operation manual. Only the settings described in the operation manual must be made as incorrect setting may result in damage and often will make it difficult for a qualified technician to make the unit work properly again. F) When the operation of the unit changes drastically, the unit requires service. By opening or removing the cabinet, you will be exposed to dangerous voltage or other hazards. Spare parts If spare parts are required, make sure that the service technician uses spare parts specified by the manufacturer or spare parts with the same characteristics as the original. Safety check After service or repairs on the unit, ask the service technician to carry out a safety check to ensure that the unit is ready for use. Handling instructions The top and back panel of the unit may become warm after prolonged use. Protect the power cord Follow the instructions below to prevent abnormal operation, electrical shock, fire or personal injury: Hold the plug firmly when inserting it into the socket. Do not put your fingers or any other objects into the unit Touching the internal parts is dangerous and may cause injury or damage. Interference Placing the unit near a television set, radio or video player may cause poor picture and sound quality. oFF: When the switch is set to OFF , the volume and standby function can be controlled by the remote. Please notice that the volume level on the OUTPUT connecter is also controlled by the remote, when the volume bypass switch is set to OFF. AC input Check that all other connections have been made correctly before inserting the mains plug into the wall socket. CAUTION: Do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly before turning on the power. Check that the mains voltage is identical with the voltage printed on the rear panel before turning on the power. So the included remote control must be pointed towards this area in order to control the speaker via the remote. If no signal is provided to the speaker for a period longer than 10 minutes, the speaker will automatically go into standby. Please notice that this button will not work, if the "volume bypass" button on the rear panel is set to ON. Please notice that this button will not work, if the "volume bypass" button on the rear panel is set to ON. Please notice that this button will not work, if the "volume bypass" button on the rear panel is set to ON. [. . . ] Then the volume will follow the signal provided to the speaker, which in this case is controlled by the left speaker. If no signal is provided to the speakers for a period longer than 10 minutes, both the speakers will automatically go into standby. This can be a MP3 player via the headphone output, it can be a CD player or it can be a source with a pre output (Volume controlled. ) The settings of the switches on the rear panel should be as described below. [. . . ]