User manual TANGENT ALIO CD-FM

[. . . ] The product may fall, causing serious injury to a child or adult as well as serious damage to the product. Any mounting of the product should follow the manufacture's instructions and use a mounting accessory recommended by the manufacturer. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 9. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Correct grounding should always be installed by an electrician. ANTENNA LEAD IN WIRE GROUND CL AMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-2 1) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NE C S ECTION 810 -21) GROUND CL AMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 2 50. PART H) 10. [. . . ] (NOTE: improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation). SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage and may damage precision components. LIGHTNING: For added protection during a lightning storm, or when it is left unattended and unused for long period of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power line . REPLACEMENT PARTS: Should replacement parts be required, have the service technician verify that the replacement parts he uses have the same safety characteristics as the original parts. Use of unauthorized replacements parts can cause fire or electric shock. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks recommended by the manufacturer to determine that the product is in a safe operating condition. HEAT DISPERSAL: Leave at least 10 cm of space between the top, back and sides of the unit and the wall or other electrical components. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. water, and dust. Do not let foreign objects in the set. Avoid high temperatures Allow for sufficient heat dispersion when installed on a rack. Unplug the power cord when not using the set for long periods of time Do not let insecticides, benzene, and thinner come in contact with the set. Handle the power cord carefully. Hold the plug when unplugging the cord. * (For sets with ventilation holes) Do not obstruct the ventilation holes Never disassemble or modify the set in any way. 3 ACCESSORIES You should find the following accessories included: 1. - When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones. Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire. Make sure that the batteries are inserted with their positive "+" and negative "-" poles positioned correctly. REMOTE CONTROL OPERATION RANGE Use the remote control unit within a range of about 7 meters (23 feet) and the angles of up to 30 degrees aiming at the remote sensor. BATTERY INSTALLATION If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case, replace the batteries with new one. 7 REMOTE CONTROL INFORMATION 6. DIM Press this button to toggle the brightness between: 25%, 50%, 75% & 100%. Menu Press the AMP button and then press the Menu button to enter the menu. Mute Press this button to mute the audio, press it again to cancel the mute function. CDP Press this button to activate the CDP input (also switches on an EXEO CDP from Standby, and switches off any other EXEO source). [. . . ] Rotate this knob clockwise or counterclockwise to choose the input source between: CDP, NET, DAB, AUX1, AUX2, PHONO. Press and hold this button to enter the menu for the below settings: EQ, SPEAKER, LOUDNESS, DISPLAY, HP FILTER, PHONO. Display Volume knob AUX2 Headphone To increase or decrease the volume. 6. 5mm jack stereo headphone output. 9 REAR PANEL INFORMATION 1 2 3 4 6 7 8 9 1. [. . . ]