User manual TANGENT ALIO CD-DAB

[. . . ] This will prevent damage to the unit from lightning and power surges. Penetration of objects and liquid Never push any foreign objects through the openings into the unit, as they may touch dangerous voltage points or shortcircuit parts and thus cause fire or electric shock. Do not spill liquid on the unit. Damage Unplug the unit and contact qualified technicians in the following cases: A) If the power cord or the plug is damaged. B) If liquid has been spilled on the unit or objects have fallen into the unit. D) If the unit does not work properly after adhering to the instructions in the operation manual. [. . . ] - Turn off the power when the unit is not used. Condensation Condensation may occur in the following cases: - When the unit is moved directly from a cold to a warm place. - When the unit is used in a room where the radiator has just been switched on or a place where the cold air from the airconditioning system is directed at the unit. - If the unit is used in the summer in a warm and humid room just after it has been moved from an air-conditioned room. The unit will then have adapted to the environment and any condensation will have disappeared. Protect the power cord - Follow the instructions below to prevent abnormal operation, electrical shock, fire or personal injury: - Hold the plug firmly when inserting it into the socket. - Do not carry out service work on or change the power cord. Positioning Do not place the unit in any of the fol. places: - In sunlight, close to heat-producing devices or in an enclosed rack. - In places with high temperatures (40C or more) or high relative humidity (90% or more). - In dirty places as some internal parts may be damaged. Do not put your fingers or any other objects into the unit - Touching the internal parts is dangerous and may cause injury or damage. - Do not place any foreign matter in the unit. Interference Placing the unit near a television set, radio or video player may cause poor picture and sound quality. In that case, move the unit further away from the television set, radio or video player. 07 CONNECTION Connection to the mains OPTICAL STEREO OUTPUT Model: ALIO CD-DAB Power rating: AC 220V - 240V~50Hz Max Power Consumption:10W R L AC 220V - 240V~50Hz ON POWER OFF Do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly before turning on the power. Open/Close: Opens and closes the CD tray. 11 FRONT PANEL AND CONNECTIONS Connections OPTICAL STEREO OUTPUT Model: ALIO CD-DAB Power rating: AC 220V - 240V~50Hz Max Power Consumption:10W R L AC 220V - 240V~50Hz ON POWER OFF 1 2 3 4 1. 4. Optical output: For connecting to an amplifier or receiver digitally. Make sure that the plug has been correctly inserted, and that the voltage corresponds to the text printed on the back panel of the cabinet. Main power switch: Used to interrupt the mains voltage. Explanation of display This unit does not feature any OSD (On Screen Display). Instead it features a more descriptive DOT matrix display that displays all the information required. The counter on the left side of the display will stop blinking and playback will continue. CD 02 CD 02 04 : 26 04 : 26 Stop/Clear To stop playback completely, press the STOP button once. The display will again display the number of tracks on the disc and the total playback time. When the STOP button is pressed all previous programming settings will be deleted. CD 20 64 : 26 Previous and next When a CD track is being played it is possible to switch to the previous track or to the next track. If you want to continue to the next track, you must press the >>I (next) button on the remote control or on the front panel once. If you want to move on several tracks, you must press >>I until you reach the track desired. If you wish to go back to one of the previous tracks, you must use the same procedure but not the same button. [. . . ] For examble if you wish to program the track numbers 5, 8, 4 in this specific order the following must be done: - Press the MEMORY button. Press the STOP button and then the MEMORY once to deactivate the programming function. Note: When you press I<< or >>I, you will select the next track in the programmed order. CD mem 01 = 01 CD mem 01 = 05 CD mem 02 = 08 CD mem 03 = 04 CD 05 00 : 01 Repeat The ALIO CD-DAB can be set to repeat one or all tracks of a CD. This is done by means of the REPEAT button on the remote control or the front panel. [. . . ]