User manual SWATCH FUN SCUBA FUNCTIONS-SETTINGS

[. . . ] Functions/Settings Fun Scuba Display Ending diving mode manually You can also end the diving mode manually by pressing the crown (out of the water). [. . . ] You can access the recording of the last dive by pressing the crown briefly. Both hands will move briefly to 3 o'clock then the recording will be played back ­ first displaying the maximum diving time and diving depth, then proceeding to show the individual diving stages. If you do not save the dive as a favorite, the recording will be overwritten the next time you dive. To return to the time, press the crown briefly twice or wait about 5 seconds. 84 Fun Scuba Functions/Settings Saving a dive as your favorite You can save a dive under your «Favorite» by pressing the crown once briefly (recording) then pressing it a second time for 2 - 3 seconds. The last dive will now be saved as your favorite and will not be deleted. The new favorite will automatically delete the old. Warnings: The SWATCH Fun Scuba is not a professional diving watch. Do not use the Fun Scuba for dives in waters more than 3000m (10000 ft) above sea level. After each dive, please rinse and clean the watch thoroughly using only clear fresh water. Under no circumstances should an object of any kind be inserted or pressed into any of the three openings on the pressure gauge (A). [. . . ] (A «fictitious favorite» has already been saved in the factory. ) Notes: Each time you change the battery, you must initialize the SWATCH Fun Scuba watch again and it would be advisable to also test whether it is watertight. 85 [. . . ]