User manual SWATCH CHRONO

[. . . ] D E F G H TIME SETTING SET ABC I ChRoNo AUToMATIC A B D H E F I C2 G GO ABC SET ABC RETRoGRAdE G A1 C1 = 1/2 min. D E F I H B A: A1: A2: B: C: C1: C2: d: E: F: G: h: I: J: Minutes counter (60 minutes) 5 minutes counter (60 minutes) Minutes counter (30 minutes) Seconds counter 1/10 second counter 1/2 minutes counter 6 minutes counter (6 hours) push-button Crown push-button hours hand Seconds hand Minutes hand Light Function A: C: Normal position of the crown position for setting the time To set the time, pull the crown out to position C and turn clockwise or anticlockwise. [. . . ] The lower push-button to reset. 3/6 USER MANUAL TAChyMETER STANdARd RETRoGRAdE REAdJUSTMENT STANdARd START 1 1 ABC 2 ABC 1 STOP 2 2 ABC ABC 4 3 5 RESET ABC ABC 6 3 3 Measure the speed Base 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec. ) on the tachymeter scale (km/h = kph). press the upper button to reach the position 12h00 with the hand of the 1/10 seconds counter. press the lower button to reach the position 12h00 with the hand of the seconds. press the upper button to reach the position 12h00 with the hand of the minutes counters. press the crown to position A. 4/6 USER MANUAL RETRoGRAdE IRoNy ChRoNo MEdIUM ABC 1 ABC ABC 1 ABC 2 4 ABC 3 ABC ABC 3 2 4 ABC ABC ABC 6 ABC ABC 6 5 5 Adjusting the chronograph (e. press the lower button to reach the position 0 with the hand of the minutes counter. press the upper button to reach the position 3h00 with the hand of the seconds counter. press the lower button to reach the position 0 with the hand of the 1/2 minute counter. press the lower button to reach the position 12h00 with the hand of the minutes counter. [. . . ] The watch will acknowledge this procedure with a revolution on all displays. If p1 + p2 are not pressed within 5 seconds, the watch will carry out the acknowledgement function automatically. 6/6 [. . . ]