User manual SUUNTO YACHTSMAN

[. . . ] Pressing the [Mode] button during this time will restart the 5 second period, continuing the backlight feature. In the main mode level, pressing the [Mode] button allows the user to select or move from one mode or function to the next (TIME, SAIL, BARO, COMP). Pressing the button again will return the user to the main mode level. In the timing functions, this button can act as a start/stop (or On/Off) button. [. . . ] At the hour desired, PRESS the [Select] button to move to the next setting. At the minutes desired, PRESS the [Mode] button to accept the changes and exit the setup program. A small bell will appear at the bottom left side in Field 2 to signify an alarm has been activated. To activate up to three alarms, please repeat steps 1-8 for the selected alarm (1, 2, or 3). The Wristop Computer stopwatch sub mode can provide split time measurement and two finish times up to 24 hours. In the TIME mode, PRESS the [Select] button twice to enter this sub mode. Field 1 displays the seconds and tenths of a second, Field 2 displays the current time, and Field 3 displays hours and minutes and to the far right "stopwatch". There are three timing modes the user can employ: · An elapsed time measurement; a split time measurement; and a two finish time measurement. PRESS the [-] button once to stop the stopwatch and to display a split time. PRESS the [-] button a second time to release the split time display and resume the stopwatch. PRESS the [-] button once to stop the stopwatch to display the finish time of the first person. In the Barometer mode, PRESS the [Select] button three times to enter this sub mode. Field 1 displays the text "SEA"; Field 2 displays the current sea level pressure; and Field 3 displays the current time. To set the sea level pressure you have two choices either give the current sea level pressure or give the exact altitude of the location (e. PRESS the [+] button to scroll the pressure upward or PRESS the [-] button to scroll the pressure downward. At the desired pressure, PRESS the [Mode] button to accept the changes and return to the main mode or if you want use altitude to set the sea level pressure, PRESS the [Select] button. At the desired value, PRESS the [Mode] button to accept the changes and return to the main mode. Note: Information on the current sea level pressure can be obtained through newspapers, local news and radio weather reports, the local airport facility or through the Internet under local weather. Information on the altitude can be found by utilizing a topographical map identifying the current location with the associated altitude marked. If the user does not press any button for 1 minute in the setup mode, the display will automatically exit setup. This feature is always displayed in all main modes providing the user a continual quick reference to analyze upcoming weather conditions. Situation 6-3 hours ago Dropped heavy (>2 mbars/3hours) Dropped heavy (>2 mbars/3hours) Situation last 3 hours Dropping heavy (>2 mbars/3hours) Remaining stable Dropped heavy (>2 mbars/3hours) Remained stable Remained stable Remained stable Risen heavy (>2 mbars/3hours) Risen heavy (>2 mbars/3hours) Risen heavy (>2 mbars/3hours) Rising heavy (>2 mbars/3hours) Dropping heavy (>2 mbars/3hours) Remaining stable Rising heavy (>2 mbars/3hours) Rising heavy (>2 mbars/3hours) Remaining stable Dropping heavy (>2 mbars/3hours) Note: If the user remains at the same elevation, the barometric trend indicator can work as a weather forecasting tool. [. . . ] The bezel is also used for determing the favored end of the start line in a race. 2 Where do I find the correct declination for my area so I can set my Wristop Computer?Local declination, either E or W, is usually marked on maps with either one-degree or half-degree accuracy. DEF - default factory setting of pressure sensor, corresponds to standard (1013 mbar or 29, 90 inHg) air pressure at sea level SNR - sensor (used in pressure sensor calibration) bEG - begin dUR dUA SPL CMP bEA CAL dEC duration dual time split time compass bearing calibration declination Battery Replacement Kit (including battery, battery lid and o-ring) Watch Straps in plastic (Regatta/Mariner) or leather (Yachtsman) Extension strap in plastic Bezel (Available only in Suunto Oy during maintenance) Suunto Oy provides moderate-priced Wristop Computer service to its customers. [. . . ]