User manual SUUNTO KB-SERIES MOTIVATION GUIDE

[. . . ] BUTTON FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Center Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The [-] Minus Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The [+] Plus Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] PRESS the Center button to accept the choice and move to the next menu item. Located above Field 4, the text "hPa" or "inHg" will begin to flash. PRESS either the [+] button or the [-] button to toggle between "hPa" or "inHg" until the desired unit of measure is displayed. 12 6. PRESS the Center button to accept the choice and move to the next menu item. Located in Field 1, the text "°C" or "°F" will begin to flash. PRESS either the [+] button or the [-] button to toggle between "°C" or "°F" until the desired unit of measure is displayed. PRESS the Center button to accept the choice and move to the next menu item. Located in Field 1, the text "m/h" or "ft/h" will begin to flash. PRESS either the [+] button or the [-] button to toggle between "m/h" or "ft/h" until the desired measure of ascent/descent rate is displayed. 10. PRESS the Center button to accept the choice and move to return to setting the Time. Alternatively, PRESS and HOLD the Center button for 2 seconds to accept all changes currently performed and return to the TIME mode. Located in Field 4 the altitude difference from previous zeroing begins to flash. PRESS either the [+] button or the [-] button to toggle between the current altitude difference and zeroing. PRESS the Center button to accept the choice and move to next menu Setting the Altitude Alarm. Alternatively, PRESS and HOLD the Center button for 2 seconds to accept any changes made and return to the [ALTI] main mode. This will reset the altitude measurement and begin displaying the difference in altitude. Then PRESS the Center button (twice) until the text "AL" appears in Field 3 and. PRESS either the [+] button or the [-] button to toggle between on and off. PRESS either the [+] button or the [-] button to numerically scroll up or down until the desired altitude is displayed. PRESS the Center button to accept the choice and move to next menu Adjusting the Resolution. Alternatively, PRESS and HOLD the Center button for 2 seconds to accept any changes made and return to the [ALTI] main mode. Note: Altitude Alarm is on and the alarm symbol visible only when you are using Escape203 as Altimeter (not Weather Station). [. . . ] Display 2 shows the maximum pressure recorded since you last cleared the history and the time and date/year of this measurement. Display 3 shows the minimum pressure recorded since you last cleared the history and the time and date/year of this measurement. Display 4 shows the maximum temperature reading recorded since you last cleared the history and the time and date/year of this measurement. Display 5 shows the minimum temperature reading recorded since you last cleared the history and the time and date/year of this measurement. [. . . ]