User manual SUUNTO COMFORT BELT MANUAL 2

[. . . ] en SUUNTO COMFORT BELT Heart Rate Transmitter Belts USER GUIDE 1 Introduction to Suunto Comfort Belt . [. . . ] NOTE: Belts with ANT icon are compatible with ANT compatible Suunto heart rate monitors, while belts with IND icon are compatible with most exercise equipment with heart rate reception. 5 Practical tips If the heart rate belt does not seem to be sending heart rate data: 1. If your skin tends to remain dry during the workout, you can improve the contact by using electrode gel. Replacing the battery The transmitter belt operates on a 3-Volt lithium cell, type: CR 2032. The average expected battery life of the transmitter belt is 200 hours of use in ideal operating temperatures. Replace the battery as illustrated here: 6 en NOTE: Suunto recommends that the battery cover and the O ring are changed simultaneously with the battery to ensure that the transmitter remains clean and water resistant. Replacement covers are available with replacement batteries. 7 3 TECHNICAL SPECIFICATIONS Water resistance: 20 m / 66 ft Weight: max. 42 g Frequency: 2. 465 GHz Suunto ANT compatible / 5. 3 kHz Suunto IND compatible Transmission range: see specification of heart rate receiving device User-replaceable battery CR2032 8 4 INTELLECTUAL PROPERTY Copyright Copyright © Suunto Oy 2008. This document and its contents are proprietary to Suunto Oy and are intended solely for the use of its clients to obtain knowledge and information regarding the operation of Suunto products. Its contents shall not be used or distributed for any other purpose and/or otherwise communicated, disclosed or reproduced without the prior written consent of Suunto Oy. [. . . ] If you wish, you may return the device to your nearest Suunto representative. 11 Copyright Suunto Oy 12/2008 All rights reserved. © [. . . ]