User manual STRONG SRT 8527

[. . . ] PART 2 • English Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO RMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado 80111 U. S. A. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. MPEGLA. COM This product contains one or more programs protected under international and U. S. [. . . ] The channel(s) you delete from the channel list will be permanently removed, also if this channel is part of the favourite list. Add channels to favourite lists  add a channel to a favourite group, use pq to select the channel, then press the To FAV button. Select the group to which the channel should be added with pq and press OK. Additionally you can also select another favourite group where to add this channel. When you have added the channel to the group(s), press EXIT to go back to the channel list. There you can proceed in the same way to add other channels to favourite groups. You can also remove a channel from a favourite group by pressing the FAV button again and selecting the group it is part of. Then press OK to remove the symbol and the channel will be removed from this (these) favourite group(s). 6. 1. 2 Channel Sort This menu allows you to sort the channels by following methods: By LCN:  channels will be sorted according to the LCN (Logical Channel Numbering) The system, which may be broadcasted in your area. If the operator does not support 13 PART 2 • English LCN your channel numbers will start with channel number 800, otherwise the LCN channels will be sorted in regional order starting with 1. Further, the LCN method will allow you to save the strongest channels broadcasted in your area, only. The By Frequency:  channels will be sorted in ascending order of the frequency in which they are The broadcasted. To execute this function it will be requested to enter the PIN code (DEFAULT PIN: 0000). After you have performed this action you will be guided to the Installation Guide again!Warning!  Delete all function will permanently delete all of the stored channels The and settings from your receiver! 6. 2 Channel search In the menu Channel Search you can adjust your search settings and perform an automatic or manual channel search. Following submenus will be displayed: Search Setup, Auto Search and Manual Search. Use pq to select a submenu and press OK or u to access. 6. 2. 1 Search Setup In the menu Search setup you can set the antenna power and the country in which you live. an active indoor/outdoor antenna) and If it requires a voltage of 5 V and doesn’t consume more than 60 mA, then you can set the antenna power to On. If you use an antenna without an amplifier or your antenna is already amplified by an external power supply or if you use an antenna from a house distribution system, please keep the antenna power Off. 6. 2. 2 Auto Search After selecting this menu item and pressing OK you will be asked to enter the PIN code (DEFAULT PIN: 0000) in order to update the current channel list. If you don’t want to perform a full channel scan you can press EXIT to cancel. After entering the PIN code (DEFAULT PIN: 0000) the receiver will perform an automatic channel search through all frequencies and after finishing this process it will update the channel list. During the search process the receiver will display the progress bar, the currently scanned frequency and the channel names. The receiver will add all new found channels to the channel list. 6. 2. 3 Manual search In this menu you can search for channels on a specific frequency or channel. [. . . ] If after performing these operations, the receiver does not work well, contact your dealer or service centre in your area. 22 7. 0 Troubleshooting PART 2 • English Do not open the receiver cover. This action will damage the warranty seals and warranty repairs will be void. Problem Possible reason Remedy Check the connection of the receiver to the main power supply Check the cable connection to the receiver. [. . . ]